Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: old Paolo air button mechanism  (Read 1565 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
old Paolo air button mechanism
« on: September 16, 2024, 04:15:21 PM »

I'm in the process of restoring this vintage Paolo Soprani box and am looking to improve the function of this air button.  Currently it works quite poorly, and looks like it always must have done so.  It's a lever-type button but it presses down on an arm that should, ideally, actually be moving laterally (towards the left in the photo) rather than straight up and down as pressing the lever-button is trying to make it do.  I'd rather not rip out the entire mechanism and build new since I currently don't have the mechanical components to do so.  I've been considering bending the lever arm that the button presses against at more of an angle, and then maybe gluing an angled block on the bottom of the current lever-button that, in theory, would help move the lever arm/opening the air valve more smoothly (since the action needs to be pushing the arm/lever laterally to one side in order to open the air valve).  Open to suggestions!

Logged
C#/D player

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: old Paolo air button mechanism
« Reply #1 on: September 16, 2024, 06:04:24 PM »

I have a same vintage 30-bass 'mixte' Paolo in which the lever arm is bent L-shaped, hammered flat and drilled on the end to accept another rod that goes straight up to the air lever (drilled underneath to capture the end of the rod). This makes for a more positive/direct action. The same principle - if not exact implementation - could probably be made to work in your box.

 
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: old Paolo air button mechanism
« Reply #2 on: September 16, 2024, 06:40:15 PM »

Sometimes you can improve this sort of mech by a suitable lubrication of the point where the wooden button presses and rubs on the wire lever.  Powdered graphite mixed with alcohol will sink in to the wood to some extent and provide long lasting smooth operation.   Polishing the contact point on the wire lever will help too.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal