Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bellows Frames  (Read 874 times)

0 Members and 1 Guest are viewing this topic.

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Bellows Frames
« on: December 02, 2024, 12:17:59 AM »

IMG_8705 by Pat McInnis, on Flickr

For anyone who has ever ordered new bellows from places like Carini, you know that they do not come with frames. You can definitely clean and reuse the frames from the 80 year old bellows you are replacing but for me, starting with a complete new bellows package is where it's at. Unfortunately for me, wood is not my medium. The good news is that I have talented friends who like whiskey. My one pal who I play with has a slick CNC machine and he was keen to give these frames a go. He had a few pieces of this really nice 3/4" baltic birch ply on hand and the thickness was almost perfect for making a one piece frame without all the gluing and mitring. I'm still not sure how the bellows pins will react to going through the cross section of ply as opposed to a solid bit of wood but I guess I will see.

Thought i'd share and get some feedback. The fit in my double Ray is perfect.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Bellows Frames
« Reply #1 on: December 02, 2024, 07:42:01 AM »

I've made my frames the old-fashioned way, and it's time-consuming, but it takes hours, not days.

I think there's some food for thought in gluing up a hardwood frame, and then getting it CNC'd to the required size. This will not make the whole process a lot more complex, but will save hours compared to making them by hand and produce a result that is not any worse than the "real thing". Especially good if you do many different bellows sizes and you do a lot of them, so you don't have to build a new mould every time.

Plywood, I'm very skeptical about. Even the best quality ply can de-laminate or can have cavities in it. You're leaving a relatively thin wall there, so high chances of ply cracking/breaking off.

Contrary to common sense that ply should have better dimensional stability, my experience is that it warps a lot more than good quality stable wood.

Ply often has tiny chips breaking off from it, and they end up getting lodged in the reeds. I took a tumble down the stairs with one of my high-end French boxes (with a lot of questionably finished laser-cut ply in it >:() a year ago. Box did not sustain any hits, just got shaken up. I've managed not to break anything. When I got home, 2 reeds stopped speaking because of the tiny ply debris getting stuck in the slots.
Time saved on CNC'ing ply gets clawed back because you now have to sand & finish the frames by hand.

One of the reasons it takes a while to make them by hand is because I close-fit them to the body while making them. In your case you might have a perfectly square frame blank, but it's either going to be small & loose in off-square box, or you'll need to spend time fitting them. I can tweak the cut by ~0.3mm on the router table as many times as I like and then check the frame to the body, but you can't really stick the frames back into the CNC machine, can you?

Externally, you no longer have the luxury look of hardwood on the frames unless you veneer the ply, which generates a lot of work. Wrapping the frames with bellows tape is probably the only option for a professional look.

Internally, while far from being a primary concern, it does not look as good as finished mahogany hardwood. You're putting £200-300 bellows on these frames, so there's a bit of a mismatch in build quality.
« Last Edit: December 02, 2024, 07:45:50 AM by mChavez »
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Bellows Frames
« Reply #2 on: December 02, 2024, 07:42:34 AM »

I'd worry about tearing the plies apart with vigorous playing. The pins will already be putting the glue under stress just by being an interference fit.
Maybe when you have drilled the pin holes, drive a screw either side of the hole at 90° to the face.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Bellows Frames
« Reply #3 on: December 03, 2024, 05:28:10 PM »

I admire you for making new frames, and congratulations. From a v personal perspective though, I don't see the point when you have the existing frames. Even if they are tatty or falling apart, it's far more straightforward to clean them up and fix them, and glue on the new bellows, than make new ones. They are guaranteed to fit properly. The only time I'd make new frames is if they go missing, or I'm building a conversion frame.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal