This is related to my previous thread. Melodeon is a Womack one-row. I don't know the correct terminology for the long, thin slips of wood which are controlled by the 4 knobs at the top and which are supposed to slide up and down to either let air flow through the holes or close off the air flow to the reeds but those pieces of wood are stuck in place. They were tight (hard to slide up and down) when I got this instrument. Maybe humidity swelled the wood to do the rest? I cannot see how the reed blocks are attached to the inside of the treble faceplate. I was thinking/hoping that by removing the reedplates I would then be able to discover how the reed blocks are attached and then remove those to correct the problem.
My guess is that the blocks are glued in place because there is no obvious evidence of screws or nails.
Any suggestions or warnings or instruction on how I should proceed with the work?
And a final comment: I am in awe of the skill and workmanship required to build a single-row melodeon! Taking this one apart (keys were sticking, air was leaking, difficult to open and shut each reed bank) has been an education!