Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Tuning scratch location  (Read 1844 times)

0 Members and 1 Guest are viewing this topic.

jarviw

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 156
Re: Tuning scratch location
« Reply #20 on: June 30, 2025, 05:07:56 PM »

OK, so I consulted the higher being  ;D
Here's what Gemini tells me

OK... but... did you read it?

I would like to suggest that possibly it's not a great idea to consult an AI on matters such as this. I'm certainly not convinced the mathematics even follows through correctly from start to end, but, I haven't checked that.


edit: does I=wh3/12​, or does I=12wh3​ ?

I = wh3 / 12


Well, some of the formulas may have mistakes as the equation don't show well on the forum text formatting, and I had to try my best to reformat it. I guess I could take screen shots and post pictures, but alas.

My reading is this formula is only pertinent to the calculation of the fundamental frequency. Think of it as if you were to cut a piece of metal to build a reed,  it helps to calculate how long to cut it.

I know there is a ton more details about this whole subject. Pretty sure this formula has not scratched the surface (sorry, punt in intended). But it helped me to understand the physics a little.

I wish AI can tune our boxes. Theo will have to train the algorithm!
« Last Edit: June 30, 2025, 05:21:16 PM by jarviw »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning scratch location
« Reply #21 on: June 30, 2025, 06:11:23 PM »

Another limitation of the formula is that it applies to a  bar of constant width and thickness.  Reeds rarely have constant width, most are tapered, and they are never constant thickness and the way the thickness changes along the length is different for different pitches.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Tuning scratch location
« Reply #22 on: July 01, 2025, 04:07:10 AM »

when you tune the reeds down, where do you remove the material to decrease the pitch and why? I am really asking from a physics theory point of view.

At the base of the reed, where it's flexing most while vibrating.
Physics:
A reed is basically a classic "mass + spring" resonant system.
Filing the tip of the reed reduces the mass, raising the frequency.
Filing the base of the reed (near where it's riveted on the plate) reduces the stiffness of the spring, which lowers the frequency.

That's all you need to know.

(In some cases the frequency of a reed is reduced by adding weight to the tip, but that's usually a design decision rather that a tuning procedure: it's a compromise to get bass reeds to fit without making the instrument bigger than you wanted it.)

Agreed 100% with Anahata.

And interestingly there's a "goldilocks zone" around the middle of the reed tongue that determines the behaviour of the reed due to force of the bellows. We usually say not to touch this area but you can actually do very interesting things by tweaking this zone. Want a honking sound like a jeffries concertina? Or want a pure tone for concert bayans? This zone has a big influence in this regard....but now we're getting into quantum physics...
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Tuning scratch location
« Reply #23 on: July 01, 2025, 10:12:28 AM »


  Interesting. when I used to play a single read Lilly, I had several reads snap. Maybe three in total. They all went in the middle which suggests that that might be the position of maximum strain?   In which case, better avoided?

  {Physics: strain refers to the actual deformation of the metal. it is local so dependent on thickness et cetera. Stress is the (dynamic) forces that underlie that}
« Last Edit: July 01, 2025, 09:05:10 PM by Chris Ryall »
Logged
  _       _    _      _ 

jarviw

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 156
Re: Tuning scratch location
« Reply #24 on: July 01, 2025, 01:36:39 PM »

And interestingly there's a "goldilocks zone" around the middle of the reed tongue that determines the behaviour of the reed due to force of the bellows. We usually say not to touch this area but you can actually do very interesting things by tweaking this zone. Want a honking sound like a jeffries concertina? Or want a pure tone for concert bayans? This zone has a big influence in this regard....but now we're getting into quantum physics...

Do elaborate on this! and "middle" as half point of the reed lengthwise?
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal