Hi,
I’m a newbie at fettling.
I really don’t like retensioning Hohner springs into their little gaps (they’re fiddly and seem to always stab my fingers when I try to bend them), so was trying to find a way around having to do this in situ.
I believe you’re always supposed to release/refit springs when the pallet mechanism is screwed into the melodeon case… ie never unscrew (or screw) the mechanism from the case whilst the levers are under tension as this will rip the screws out of the threads as they approach the ends of the holes.
However this means you have to refit the springs in a really awkward fashion (it’s much easier to do this when the mechanism is outside of the box)
I was playing and I found it’s very easy to sequentially insert a bamboo skewer on the little ridge beneath the screws (see photo) which removes almost all the tension from the levers on the case.
You can then safely unscrew/screw the mechanism without risking the screw threads and hence (if you want) fit the springs *before* re-attaching the mechanism (much easier as way more space and angles)
Again I’m not an experienced fettler, so there may be some downside to this I’m not aware of, or some magic tool which makes bending springs back in situ less hard, but I thought this was a nifty tip, so sharing incase of use to anyone.