Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Building a Shruti/Drone Accordion  (Read 872 times)

0 Members and 1 Guest are viewing this topic.

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Building a Shruti/Drone Accordion
« on: July 27, 2026, 11:24:31 AM »

Why Frankenstein an Innocent Accordion?

I've wanted a foot-powered shruti box for ages, to play drones while I play other instruments. Initially this was so I could make solo low whistle sound a bit more interesting, but this has expanded into various other combinations over time. I borrowed a cheap shruti box last year, but was unimpressed with it (it was so loud that you could barely hear the whistle). Maybe a more expensive shruti box would be better, but I didn't really fancy shelling out ~£400 to find out.

A while ago, I bought the cheapest Hohner Student piano accordion I could find on eBay so that I could use the bellows to build a tuning table. This left me with a bellows-less accordion sitting on the shelf as an ornament, until I recently decided to try and convert it into a drone box.

I came across a video of someone using cheap blower fans to make a drone instrument using slide flutes, which gave me the idea of using an electric fan to power my drone box. This is the fan I ended up buying. It's a 12V 97mm x 33mm Centrifugal Blower Fan with Adjustable Speed Controller.

Making the Accordion Air Tight

Air tightness is still important for this box, albeit slightly less important than if I were playing it as a traditonal accordion. The more leaks there are, the higher the fan speed needs to be to make the reeds sound, and the noisier the fan gets.

Given that my accordion had no bellows, I needed to find a way to attach the treble and bass ends together. I conveniently still had the original bellows frame for the treble end, so I used liquid hide glue (more reversible than PVA) to glue the treble bellows frame onto the bass end. This allows me to still use the original bellows pins to attach/detach the treble end to access the insides. If you still had the original bellows, you wouldn't need to do this step.

If I was going to play this accordion normally it would ideally need a new set of valves, but because the air supply only works on the push, I decided to tape off all of the pull reeds instead to reduce air leakage. Likewise the pallets would ideally be refaced, but because I'm not opening & closing them mid-tune I can get away with leaving them as is.

Connecting the Air Supply

This was the most challenging part of the project. I've been trying to avoid making any irreversible changes to the accordion (other than the bellows changes I'd already done), so I decided to unscrew the air button mechanism and use the original air hole to connect my air supply.

For the initial prototype, I used a section of bike inner tube stretched over the fan output and then taped inside the air hole on the accordion. This was good enough to prove that the fan worked and that I liked the sound the box made. The biggest problem was that the inner tube had to be kept perfectly straight, because the fan wasn't powerful enough to straighten out any kinks in the hose. This meant I ended up with the fan dangling from the bottom of the accordion, which looks rubbish, is quite fragile, and can be heard when recording the drone box.

For a more long term solution, I bought 3 metres of 19mm braided PVC hose, a pack of miscellaneous hose barb connectors and some metal hose clamps. This works much better than inner tube and lets me get the fan further away from the box, and gives me better options for how to connect it all together. I chose a hose with a 19mm inner diameter because that matched the diameter of the air hole. I was hoping that I could just stick a hose barb through the hole and use a bit of hot glue to seal it up. This sort of worked, but the weight of the hose dangling from the connector caused the barb to loosen and break the seal.

My third (and hopefully final) hose connection idea was to glue a section of my PVC hose into a small wooden block (using Araldite epoxy), and then to glue the wooden block inside the accordion (using hide glue). This provides a lot more support to the hose connector than the hot glue did, and hopefully if I ever need to remove it then the hide glue should be water soluble. Because it uses the same PVC hose as the rest of the air supply, I can just use another plastic hose barb to connect my full air hose to the little adapter inside the air hole. This also means I can easily remove the hose connection and reattach the air button mechanism if I wanted to (while leaving my support block in place inside). It's still early days on this connection but it's looking promising so far (I'll update this post if I end up changing it again).

Playing Some Drones

Now that I have an air supply, I need to have some reeds. Because my box has no bellows, the interior space is limited. This means I can either have 2 treble reed blocks, or 1 treble reed block and 1 bass reed block. By sheer luck, it works out that the 1 treble reed block plays all the white notes on the keyboard (except F), and the bass block gives me D, G, C, F basses. This seems like a good combination allowing some good options.

It was conveniently easy to tune the reeds. No need to tune the pull reeds on the inside of the block, which are always a bit fiddlier than the push reeds, and no need for a tuning table because I can just leave the air supply running and lift the whole treble end off to tune the reeds without removing the blocks. I went for approximately a 2hz tremolo which is generally my preference, but it does sound a bit too similar to my melodeon. In future I'd like to add a stop to take out the tremolo reeds for more sound options.

For now, I'm using some small clamps to hold the keys down. I haven't worked out a good way to hold the bass buttons down yet.

Demos

Here's a little video showing the box in action. It was made before my recent air connection improvements, the hot glue connection has been replaced now.

And here's a video of me playing a tune with it. This was before I added the tremolo reeds back in and upgraded the air supply.
« Last Edit: July 27, 2026, 12:01:03 PM by Andy Goldfinch »
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Building a Shruti/Drone Accordion
« Reply #1 on: July 27, 2026, 11:30:02 AM »

Here are a couple of pictures of my hose connector
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Building a Shruti/Drone Accordion
« Reply #2 on: July 27, 2026, 11:33:50 AM »

And here's the fan and hosing I used.

Let me know if anyone has any questions or wants to see any other pictures of it!
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Building a Shruti/Drone Accordion
« Reply #3 on: July 27, 2026, 03:45:15 PM »

Bravo Andy! I admire your ingenuity and determination. I would love to have a convenient way of launching a drone, and I think Shruti boxes are very cool.

Interesting that you choose to have your gizmo play triads. For me the chief joy of a drone would be the ability to harmonize with a single note (ideally a very low and gutsy one) adjusting the pitch of the melody notes accordingly. That would work well with a fiddle as melody instrument and to some extent a whistle (your low whistle?) or flute, but not with an accordion obviously.

All that aside, 👍👍👍.

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Building a Shruti/Drone Accordion
« Reply #4 on: July 27, 2026, 03:58:50 PM »

I think my favourite drone voicing so far is Root + Fifth + Octave Root (all played on the keyboard end with clamps). It's a little more interesting than just a single note, and having the root in 2 octaves makes it a bit stronger than the fifth. I have briefly tried full major and minor chords, but I think there's too much going on for a drone.

Having said that, I'm working on a tune in Bm at the moment and the drone box only has a single B and doesn't currently have the second treble reed block with the accidentals installed, and just playing over a single note sounds pretty good too.
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Building a Shruti/Drone Accordion
« Reply #5 on: July 30, 2026, 01:44:24 AM »

Did you enlarge the holes in the fondo, soundboard, whatever, so that the bass reeds sound properly?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Building a Shruti/Drone Accordion
« Reply #6 on: July 30, 2026, 08:11:09 AM »

No I've not had to enlarge any holes, but I do have to turn up the fan's power to get the bass reeds sounding. For a treble only drone of 3 notes (6 reeds) I've typically found that the fan's controller needs to be on about 30%, but to press a single bass button (2 reeds) it takes more like 50-60% power to get them going.

I have also found that getting them started takes more air than keeping them going (maybe I need to adjust the set of the reeds if they're not starting cleanly), so once they're going I can back off the air a little without them dropping out.

One thing I have noticed is that because of the position of the air hole, my air supply is firing directly at the lowest treble reeds, so they sound a bit better than the high treble reeds. I'm considering adding an angle connector or something else to diffuse the air inside the box a bit before it gets to the reeds. Mind you, I do quite like the lower treble notes sounding stronger than the high ones at the moment, so maybe I won't bother.
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Building a Shruti/Drone Accordion
« Reply #7 on: July 30, 2026, 11:37:06 AM »

Ah, I see. So you have the bass reeds still in the bass end. How do you hold a bass button down?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Building a Shruti/Drone Accordion
« Reply #8 on: July 30, 2026, 11:50:41 AM »

Quote
I have also found that getting them started takes more air than keeping them going (maybe I need to adjust the set of the reeds if they're not starting cleanly), so once they're going I can back off the air a little without them dropping out.

You should be able to operate the reeds with less set than in a bellows driven box.  You just need enough set for the pressure you are using. In a bellows driven box you always need enough set so that the reed doesn’t choke at high pressure.  You don't have that additional constraint.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Building a Shruti/Drone Accordion
« Reply #9 on: July 30, 2026, 11:56:57 AM »

Ah, I see. So you have the bass reeds still in the bass end. How do you hold a bass button down?

I have not yet worked out a good way of holding the bass buttons down (other than lying the box on its back and using a weight), but I now realise you'd assumed that I'd put the bass reeds in the treble end. I might investigate whether this is possible because it would definitely make it easier to hold the keys down. (But as you said, would probably need modifications to the pallets/fondo holes to give enough air flow)

You should be able to operate the reeds with less set than in a bellows driven box.  You just need enough set for the pressure you are using. In a bellows driven box you always need enough set so that the reed doesn’t choke at high pressure.  You don't have that additional constraint.

That's an interesting point Theo, thanks.
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal