Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 4 5 6 [7]   Go Down

Author Topic: A series of holiday projects  (Read 37984 times)

0 Members and 1 Guest are viewing this topic.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #120 on: December 29, 2010, 05:18:57 PM »

Not sure where I'm going to get a margarine tub though, it takes me 7 weeks to get through one :P
Buy the margarine anyway plus some nuts and seeds and then make some Blue Peter birdcake. You can use all the marge in one go then, as well as doing your bit for the local environment and wildlife.  (:)

But I don't have a garden! :P Maybe I'll swipe a margarine pot from home if we use one up before I go.

Can you not understand the simplest of instructions? :D
They quite clearly state that you should use the lid from a margerine (sic) tub.
This can be reused to protect any unused margarine after thorough washing if no cling-film is available.

Oops... :|bl That would make more sense :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: A series of holiday projects
« Reply #121 on: December 29, 2010, 05:25:01 PM »

Can you not understand the simplest of instructions? :D
They quite clearly state that you should use the lid from a margerine (sic) tub.
This can be reused to protect any unused margarine after thorough washing if no cling-film is available.
Although, thinking about it, you don't actually need to remove the lid in the first place. Just make sure you've made your lunchtime sandwich before you start your melodeon repairs.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #122 on: January 02, 2011, 12:51:09 AM »

Thanks to a conversation with Steve today I now feel a lot happier about starting tuning (:) I generally feel unwilling to start something before I am organised and know what I am going to do and he has helped a lot with that.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #123 on: January 30, 2011, 01:48:20 AM »

Well, I was aiming to start tuning by the end of the month... that hasn't happened. No particular reason, just me not getting round to doing much. However, I have now finally finished rewaxing and revalving the treble end of my Welty, so technically I can start right away! Except that I won't, there's a fair bit of prep to do first.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: A series of holiday projects
« Reply #124 on: January 30, 2011, 07:07:13 PM »

Ukebert,

I'm finding the process of tuning to be fairly straightforward. The first 10 to 15 reeds I worked on were slow going because I didn't have a feel for how much metal to take off to achieve the amount of pitch change I needed. As I've done more, I've become more confident and can now get to the correct pitch for a reed in about three tries. I've decided to switch to the Dedic tuning design and so all my reeds need to be lowered in pitch. I'm learning a lot about how to use the scratcher to get there. Once I get close to the pitch, say 2 - 3 cents sharp, I'll switch to 320 grit wet or dry sand paper for the final touchups. The 320 seems to be a good grit - not too aggressive and not too slow. 600 grit was too slow once I'd gotten confident.

Good luck with the tuning.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #125 on: February 24, 2011, 01:54:24 AM »

An update: As those following my facebook feed will know, this term is going very badly for me and so box repair has taken a back seat due to lack of time. So all I've done is finish rewaxing and revalving the Welty.

I do now have a junk PA to practice taking metal off reeds, chickening out of going straight for the Welty. I'd like to get away with having more than half the reeds intact once I've finished with it. Hopefully messing around with the PA will give me a feel for it.

When I'll get round to doing it though I have no idea :( I seem to have no time, so little time that I spend most of it complaining about how little of it I have. Typical student unfortunately :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #126 on: September 07, 2011, 12:53:49 AM »

Well, after a long hiatus, finally started tuning today!

Well, sort of. I was messing around with the junker PA that I have, bought off Ollie. The reeds are crap, it's poorly made, plays horrible and the bellows are shot, so I don't feel bad about purposefully ruining it.

Had a go at altering pitch of reeds (tuning is too strong at this time). Decided to see how much metal needed to be taken off to get different effects, started off with steadily raising the pitch of one reed from B to C. First tried the sanding pens that I have. The 320 I found a bit aggressive, the 400 was a bit more reassuring. But then I decided that it was very slow, so tried the file. This worked very well, but it was difficult to file evenly. I raised the reed up a semi-tone and noted a loss of timbre, a lot of the lower harmonics had disappeared. No real way to get them back, my guess is that taking metal off more of the reed would avoid that? Not sure. I was fairly localised to the tip. This is why I have a junker. Gauging the effect of tuning is easier when you are taking larger amounts of metal off.

Unfortunately I need a new scraper, or I need to make mine properly. I was using the tip of a needle file that I had ground down a bit on a stone. Probably not enough, it wasn't hard enough really. Made very little difference in pitch. I found that using the sanding pen was more effective, but took off a greater surface area of metal. Requires more experimentation. Also practised pinging up a reed on the other side and scraping it, which was fine. No room for a pen, so scraping is all I can do.

Didn't have much time, so didn't actually tune a reed dead on. My laptop ran out of battery and I needed to have some food before then. Also found that the tuner that I am using (Bill's) tends to fluctuate a lot when I excite the reed. It varies by as much as a cent, which is obviously not ideal. Might consider getting a commercial tuner from somewhere. Expense is the big issue there though :(

Conclusion is that it is quite difficult. Felt like I was blind, not knowing how much to take off. Appreciating the advantage of a tuning table rather than tuning bellows and wondering how I am going to do fine-tuning inside the instrument.

Considering having a frequency analysis program open alongside the tuner in order to quantify what my ears are telling me.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: A series of holiday projects
« Reply #127 on: September 07, 2011, 01:06:15 AM »

Don't be intimidated, just keep going. You do get the hang of it after awhile. Keep going on the PA and you haven't lost anything important. I've been using Dirk's Tuner and find it quite helpful. Theo uses a different tuner and tunes mostly by ear, especially when tuning the tremolo.

Did I send you a scratcher? If not, PM me and I'll send you one that works for me. I've found then fairly easy to make.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #128 on: September 07, 2011, 01:32:14 AM »

PM sent ;D

Thinking of getting the Strobosoft. Dirk's tuner is too much, whereas the Strobosoft is only around £30. I could probably stretch to that. I don't think that I need the deluxe edition.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: A series of holiday projects
« Reply #129 on: September 07, 2011, 05:11:35 AM »

Now that I've retuned my Erica for the third time, I'm finding it much easier and I'm more accurate. Do your test tuning on the PA reeds but work on getting whatever reed you are working to be exactly the pitch it's designed for. I'm assuming you won't be repitching the Welty? If you are not repitching the Welty, you've only got very small changes to make to get it back into tune. I wouldn't worry about changing the pitch by a half or whole tone since it's not needed.

Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: A series of holiday projects
« Reply #130 on: September 07, 2011, 08:21:28 AM »

Unfortunately I need a new scraper, or I need to make mine properly. I was using the tip of a needle file that I had ground down a bit on a stone. Probably not enough, it wasn't hard enough really.
I made mine from a ground-down needle file and it works very well.
Using an old oil-stone I first ground away all the file teeth for about 4 cm away from the tip continually rotating the file to keep it even and circular (it took ages). This process wears a groove in the stone, which is quite useful for subsequent re-sharpening of the file/scratcher. Then (using a different part of the stone) and holding the file at 90° to the stone surface, I ground the tip flat so that I ended up with a small flat circle on the tip about 0.5 mm dia. and with sharp edges.

When the scratcher is in use, you need to keep touching up the sharpness on the tip with the oil-stone.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: A series of holiday projects
« Reply #131 on: September 07, 2011, 08:31:47 AM »

PM sent ;D

Thinking of getting the Strobosoft. Dirk's tuner is too much, whereas the Strobosoft is only around £30. I could probably stretch to that. I don't think that I need the deluxe edition.

If you have access to an iphone or ipad the Peterson apps are excellent, and much cheaper than the full strobosoft.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A series of holiday projects
« Reply #132 on: September 07, 2011, 08:34:18 AM »

Did I send you a scratcher? If not, PM me and I'll send you one that works for me. I've found then fairly easy to make.

Ed's scratchers are fabulous, I use nothing else  ;D

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #133 on: September 07, 2011, 02:03:08 PM »

PM sent ;D

Thinking of getting the Strobosoft. Dirk's tuner is too much, whereas the Strobosoft is only around £30. I could probably stretch to that. I don't think that I need the deluxe edition.

If you have access to an iphone or ipad the Peterson apps are excellent, and much cheaper than the full strobosoft.

I don't, and unfortunately much as I would like an iPad, iPhone or iPod touch, the price saved would be less than zero when the price of the hardware is taken into account.

Does anyone know of a nice cheap but effective electronic tuner?

I am going to get one of Ed's scratchers. Thanks very much to him!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: A series of holiday projects
« Reply #134 on: September 07, 2011, 03:01:51 PM »

Ed's scratchers are fabulous, I use nothing else  ;D

Glad to hear it's working for you Lester!
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: A series of holiday projects
« Reply #135 on: September 08, 2011, 10:46:13 AM »

PM sent ;D

Thinking of getting the Strobosoft. Dirk's tuner is too much, whereas the Strobosoft is only around £30. I could probably stretch to that. I don't think that I need the deluxe edition.

If you have access to an iphone or ipad the Peterson apps are excellent, and much cheaper than the full strobosoft.



I don't, and unfortunately much as I would like an iPad, iPhone or iPod touch, the price saved would be less than zero when the price of the hardware is taken into account.

Does anyone know of a nice cheap but effective electronic tuner?

I am going to get one of Ed's scratchers. Thanks very much to him!


These tuners are really good for the money http://www.jhs.co.uk/seiko.html
I use one similar to the SAT 501 as a backup to my Korg. They are very accurate and also show how many cents sharp or flat you are.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: A series of holiday projects
« Reply #136 on: September 09, 2011, 07:39:18 PM »

This http://code.google.com/p/ctuner/ from a melnet member Bill the Farmer is quite good for single reeds.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: A series of holiday projects
« Reply #137 on: September 10, 2011, 06:06:44 PM »

I don't know how I managed to miss the whole of this thread the first time through! ukebert, I'm sorry mate, some of the questions were obviously aimed in my direction but the answers you got from others were at least as good as mine would have been.

I'd be trying out Bill the Farmer's tuner, not least because of the attractive price point!

You seem to have the scratcher thing sorted now but I put a 120mm long piece of 3mm round steel stock (would have used brass but there wasn't any to hand) into the chuck of a lathe. Popped a 1mm tungsten drill bit into a chuck in the tail stock and bored a hole about 12mm deep into the steel rod. I next put the 1 mm drill into a vice with the twist part projecting up, this I snapped off using a smart tap with a hammer. The resulting piece of tool steel (the plain shank of the drill) was then Araldited into the steel handle and ground roughly square on a grinder and then given the Theo treatment to get it nice and sharp.  :D
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: A series of holiday projects
« Reply #138 on: September 13, 2011, 07:35:09 AM »

I'd be trying out Bill the Farmer's tuner, not least because of the attractive price point!

I'll second that - I've just given it a try and I'm suitably impressed. Incredibly easy to install, set up and use, and I find it much more useful than the Seiko and Korg tuners I've been using. OK, it doesn't have the bells & whistles of Strobosoft, but I'm not likely to want to tune a box to Artistic Temperament or Wilberforce's Strangulated Myxomatosis Minor, or whatever.  Thanks Bill - fine job!

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #139 on: September 18, 2011, 11:15:15 PM »

I don't know how I managed to miss the whole of this thread the first time through! ukebert, I'm sorry mate, some of the questions were obviously aimed in my direction but the answers you got from others were at least as good as mine would have been.

Don't worry, your thread (and is) was a constant source of information and inspiration! For me tuning is the big hurdle still to go.

@GPS It is Bill's tuner that I'm using. I just found that it fluctuates a lot, but perhaps that is just due to the reed itself and I need practice at sounding it consistently (I'm using tuning bellows rather than a table).
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: 1 2 3 4 5 6 [7]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal