Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4   Go Down

Author Topic: Tim Reed Cajun accordions  (Read 30062 times)

0 Members and 1 Guest are viewing this topic.

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Tim Reed Cajun accordions
« on: June 22, 2010, 08:22:38 PM »

http://www.cajuncraftedaccordions.com/Ordering.php

I might not be the first to post about this gentleman and his accordions.  Anyone have experience with him.  Seems to be rather well priced for a box with Binci reeds.
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Tim Reed Cajun accordions
« Reply #1 on: July 07, 2010, 02:28:17 PM »

Butted corners.
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Tim Reed Cajun accordions
« Reply #2 on: July 09, 2010, 12:24:40 AM »

Butted corners.

I'm not familiar with Tim Reed's boxes, but this joint is suitable for an accordion case and I don't think it's a fair assessment of an accordion's quality given how many other factors contribute to a make a high quality instrument.

It's not much different than a mitred corner, when you're talking wood panels that are only half an inch thick. Moreover, a butt joint in this case has the advantage of at least one half of the joint using long grain, whereas a mitre is all end grain, i.e. not a glue surface. I've never seen any accordion suffer from racking due to poor construction as by butt joints as we generally don't use them for step stools and there is no sheer force involved in playing.

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Tim Reed Cajun accordions
« Reply #3 on: July 09, 2010, 12:31:53 AM »

http://www.cajuncraftedaccordions.com/Ordering.php

I might not be the first to post about this gentleman and his accordions.  Anyone have experience with him.  Seems to be rather well priced for a box with Binci reeds.

Ajay,

There is a fellow on YouTube by the name of Jim who plays mostly Marc Savoy boxes, but he has experience with a wide variety of single row Cajun instruments as well as with instrument modification, maintenance, tuning, etc. I had a conversation with him once about a few other Louisiana-style box makers when I was considering one I saw on Ebay and if you shoot him a PM then he might have the information you're looking for. He's in pretty regular contact with some of those makers. There's also a Cajun box forum that's just as active as mel.net I just can't remember the name at the moment.

Here's his profile page on TY:
http://www.youtube.com/user/BmoreBusker

Chris

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Tim Reed Cajun accordions
« Reply #4 on: July 09, 2010, 02:55:56 AM »

Butt joints....
Are by many, not considered a joint at all

The issue is one of taking extra time and skill to make a joint that does not show end grain and requires more than junior high school woodworking abilities.

Many Cajun accordeon makers take the time and trouble to make mitre joints, among them Jude Moreau and  Poullard.

Butts are expedient, take no skill and are unsightly.

Just an opinion.

There is NO good reason to use a butt joint other than a time saver and lack of skill.

The following accordeon makers use mitres
Kincora
Gaillard
Bergflodt
Castagnari
Melodie
Messervier
Clement Breton
Sagne
Van der AA
Van der Leuuw

There are always apologists for  butt joints.
Why not just make em ?

Problem solved.

No one ever says... oh  too bad   mitre joints

I spoke with Jr Martin and wanted to order and accordeon... he would not do a butt joint
I asked him why...
Answer.. I sell all I can make without them.

Buy em if you like em.

Butt  where else is the builder cutting corners. ?
Saltarelle ie Dino Baffetti
etc
etc
etc
Logged

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: Tim Reed Cajun accordions
« Reply #5 on: July 09, 2010, 05:05:31 AM »

I've seen this argument many times on the site here!  I see your point about craftsmanship and I think it's fair to address that point, seems like we pay a premium for these boxes and they should be built in a premium way.  I hear also this is a huge talking point and area of discussion between these very same makers.  It seems to be a reoccurring theme here on Mel.net.  My Globe Special has mitred corners and I think they look nicer than the butted joints. As to whether they affect acoustic quality, that I doubt!  It is a sign however of a maker who cuts corners (no pun intended) the fact is that craftsmanship is important if your going to spend 2400.00 on a box!  That said Tim Reeds boxes start at 1200.00 which to me allow for butted joints as long at they are made well and sound great.  That I don't know yet. Still thinking and talking about this investment.  However Tim says he uses Binci A Mano reeds and high end woods etc.  Since I have not heard his boxes as of yet I cannot judge, butted joints aside I'd say that 1200 dollars is quite reasonable for a box w/ Binci A Mano.  IMHO!
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Tim Reed Cajun accordions
« Reply #6 on: July 09, 2010, 09:57:54 AM »

Yo Jeff. I use mitres so add me to your list.  ;)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Tim Reed Cajun accordions
« Reply #7 on: July 09, 2010, 10:31:05 AM »

Surely,

If strength, elegance and the acme of wood working caftsmanship are important then the darn things should  have secret mitred dovetail corners .  .  ? ;D

Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Tim Reed Cajun accordions
« Reply #8 on: July 09, 2010, 11:26:58 AM »

Surely,

If strength, elegance and the acme of wood working caftsmanship are important then the darn things should  have secret mitred dovetail corners .  .  ? ;D



Fancy pants.  ;)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

C age ing

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 434
  • New fangled melodeon?
Re: Tim Reed Cajun accordions
« Reply #9 on: July 09, 2010, 12:38:12 PM »

I suppose it depends on whether you want to play the box or just put it on the shelf and admire it.

Ho hum. Each to their own.
Logged
My Erika is as old as me. Luckily, it is not as decrepit.

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Tim Reed Cajun accordions
« Reply #10 on: July 09, 2010, 01:29:44 PM »

If strength, elegance and the acme of wood working caftsmanship are important then the darn things should  have secret mitred dovetail corners .  .  ? ;D

I'd rather go for something like the third and fourth boxes in the first row:
http://www.eurus.dti.ne.jp/~k-yazawa/jointwork.html

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tim Reed Cajun accordions
« Reply #11 on: July 09, 2010, 01:59:10 PM »

I've often thought it would be nice to build a box that looked as rough as a bandgers wotsits, but played like a dream!  Unfinished exterior wood surfaces with sawmarks, maybe a quick paint job with a few dribbles, and the corners rubbed away to show contrasting wood, but carefully built action and reedwork. :o
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Tim Reed Cajun accordions
« Reply #12 on: July 09, 2010, 02:26:35 PM »

Agreed, but with proper mitres.

Theo you are describing some of my furniture and my  (folk)art .

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tim Reed Cajun accordions
« Reply #13 on: July 09, 2010, 02:29:42 PM »

Agreed, but with proper mitres.
Of course, but disguised.


Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Tim Reed Cajun accordions
« Reply #14 on: July 09, 2010, 03:17:08 PM »

Theo,
You are describing my furniture and  my folkart.

Added to the list of Mitre Makers

Rees Wesson
Hohner
Beltuna
Gagne
Beltuna
serafini


Butt  Boxes

Savoy
Jr Martin
All the wannabe copyists..who are slapping boards together , belt sanding the butt joints and covering them with bits of tin ( aluminum ) to cover
and then engrave/imprint billboard sized scrolls etc (clumsy quasi arte nouveau ) on the end plates to distract from the clumsy corners.
Why is no one doing something original.  Oh I see, it's tradititon... what tradition.. German , Bohemian Saxon or bogarted (er adopted.)
I appreciate all the elements and the idea, but how about just a spark of imagination or perhaps a slightly higher degree of workmanship.
Unless that too is part of the ( new) tradition.


To butt or not to butt, that is the question.

And now I'll butt out.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Tim Reed Cajun accordions
« Reply #15 on: July 09, 2010, 03:33:57 PM »

but, but, but..............................!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

emrock

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
  • Busker, based in Southern Germany
Re: Tim Reed Cajun accordions
« Reply #16 on: July 09, 2010, 04:29:59 PM »

Must admit that my home made mini melodeon prototype has butt joints. Though the box is tiny, and the joints are all secured with a 2mm brass pin as well. This may change with the next one I build but for the time being I'm a butt jointer  >:E

runs for cover
Logged

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: Tim Reed Cajun accordions
« Reply #17 on: July 09, 2010, 05:39:00 PM »

An accurate 90 degree cut takes just as much skill and machine setting as an accurate 45 degree cut. Its just a different angle and is of little relevance to the working or playing of the finished melodeon.Even if it did take more skill, so what? wasted effort and expense.
 
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Tim Reed Cajun accordions
« Reply #18 on: July 09, 2010, 07:40:48 PM »

I've often thought it would be nice to build a box that looked as rough as a bandgers wotsits, but played like a dream!  Unfinished exterior wood surfaces with sawmarks, maybe a quick paint job with a few dribbles, and the corners rubbed away to show contrasting wood, but carefully built action and reedwork. :o

The "Imaginaire" that Rees had (has?) was a bit like that.
What you described sounds like 'shabby chic' -- in which case, nails might be the appropriate "joinery"!

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Tim Reed Cajun accordions
« Reply #19 on: July 09, 2010, 08:18:43 PM »

So if it does not take any more skill, why not do it.... because it does take more skill and more time

Jr Martin flat said it took too much time... he tried it and decided against it... expedient.

Mitres do not show exposed end grain.. look at Japanese  and most oriental furniture.. never an exposed end..

Wasted effort and expense... always an apologist for substandard... no skill effort

So I will take it that all the accordeon makers listed are wasting their time and adding needless expense

Imagine a Gaillard with butt joints.....

Ypu buy and play what you like .. I'll stick with quality

And If Martin an dSavoy are cutiing corners making butt joints and their quality ( IMNSHO) is matched by many who sell for less, is not the saved time ergo money going into their pockets and not going back to the customer.  Computed to not such a great value.. I don;t pay for fame but I'll pay more for excellence..

Might er Might not   I'll Mitre

PS:

Perhaps I did not mention I am a full time furniture maker... no ifs and or "butts"

I still maintain that a box maker who makes expeditious butts, is cutting corners elsewhere.
Logged
Pages: [1] 2 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal