Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4   Go Down

Author Topic: Tim Reed Cajun accordions  (Read 30083 times)

0 Members and 1 Guest are viewing this topic.

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: Tim Reed Cajun accordions
« Reply #20 on: July 09, 2010, 09:38:35 PM »

If your buying a melodeon as a piece of furniture then fair enough, if your buying it as a musician don't worry about it. If the maker has saved a bit of money on the corners good luck to him. He might stand a better chance of staying in business to make your next box. Even if end grain does offend you It really doesnt make any difference one a 1 row as the metal corners cover it.



Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: Tim Reed Cajun accordions
« Reply #21 on: July 10, 2010, 04:17:48 AM »

  I think your somewhat correct in your assumptions when you say if one cuts corners on construction they might pay less attention to detail in other areas such as reed work etc.  I think though that if your a person of relatively modest means and you have the choice between a Messervier that runs a couple thousand or more and a cajun box that sounds good seems adequately constructed and is durably if not beautifully made, and costs a fraction of the name box then that's a logical choice.  If Savoy started mitering his corners and then subsequently raised the cost 2-300 bucks I'd tell him to go pound sand.  As it is I can't afford one of his boxes butt jointed or not. 

I have a Stickley Bed that I treasure and it's construction is probably up to your standards, I inherited that bed but if I had to go out and buy one now it would break the bank, I'd sooner go to Ikea and not have to pawn my soul for a bed.  The fact is that it's all well and good to talk about mitering joints but if I can't afford it then I don't give a hoot as to whether it's mitered or not!  I think that mitering is probably the sign of a superior craftsman, attention to detail is always a good prognosticator of the rest of the construction of an accordion.   I think Savoy is overpriced and 75% of the people who buy his boxes do so so they can have a "real Savoy"   Or is that Mcoy? 
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Tim Reed Cajun accordions
« Reply #22 on: July 10, 2010, 08:53:39 AM »

I don't agree that a using butt joint, where a mechanically stronger joint is not required given the expected use (holding on the lap or dangling from straps), is cutting any corners at all. It takes about the same amount of time to prepare four properly squared butt joints for glueup as it does to set up the shooting board with a donkey in order to dress the edges of two freshly mitred boards. If we were talking about tables, or furniture that is commonly leaned upon or carries things, then it would be different.

I ask myself: What is it about an accordion that requires a mitre joint to be used for its casework over a reinforced butt joint? Aesthetics. So why not half blind dovetails? Why not mitred rabbet joints? A reinforced butt joint is just as strong for this purpose, otherwise we would be seeing $1200+ accordions at sessions everywhere which suffer from racking after heavy play (and we don't). Has anyone ever seen a designer accordion that has been broken due to poorly designed corners?

Moreover, using a butt joint doesn't indicate poor quality in other areas of a fine accordion. Where could other corners be cut? It's not like a car where there are thousands of parts which can be hidden from view. If the builder "cuts corners" in tuning the reeds then his boxes would be out of tune. If he used a poor finish then the wood would be blotchy. If he used poorly seasoned, unstable lumber then the joints would tear themselves apart. If he used strips of newspaper for ventili then he would do fine as a roadie for a conjunto band, but fail as an accordion builder. No one claims that a manufacturer is cutting corners when they use veneered plywood instead of solid wood for the casework. Why is a butt jointed case that is quite strong and not known to fall apart in this particular application considered cutting a corner? Most mitred corners in accordions that I have seen are reinforced from the inside, much as a butt joint is.

I bought our bed at Ikea. It was inexpensive, it is quite comfortable, and it fit in the car on the way home. But while the bed exceeded my expectations, I have to warn you that the 50 cent coffee is genuinely terrible.

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Tim Reed Cajun accordions
« Reply #23 on: July 10, 2010, 02:57:18 PM »

Hey Ajay, FYI several years ago -- very recently in fact -- a new Savoy box cost about $1200 and the cheaper Cajun boxes were about $900.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Tim Reed Cajun accordions
« Reply #24 on: July 10, 2010, 03:13:12 PM »

It is good that some accept mediocrity.

Some folks will buy a name brand of modest quality , for a higher price, rather than buy a better item
by an unknown maker for less. . This perpetuates the myth.

What is really silly is that the copiests simply don't get it, and reproduce the
mediocrity as if that mythical maker's product is the standard; and the standard is low.

It has been  said that it what you do when no one is watching that is a real determinate of character

I also believe that unseen areas of extra effort determine quality. That which you do not see.
 A  box  maker ( or any other craftsman) can demonstrate his respect for the materials ,  the craft , and the customer by
that unseen extra measure.   And that is ... character.  It often translates to an undefineable quality, beyond simple excellence.
And I suspect that the maker did not really expect compensation for the extra effort.


This has always been a point of curiousity to me..
An accordeon maker offers three levels of quality
1.  Plain
2, Slightly figured
3 Highly figured

The retail price goes up for each level...

1.  $1995
2.  $2295
3.  $2495

Why , when the increase in the cost of the materials is about $25

There is nothing that justifies the use of a butt joint. In my opinion it demonstrates a contempt for the customer, laziness, greed , or lack of skill.   No excuses.
« Last Edit: July 11, 2010, 05:30:24 AM by melodeon »
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Tim Reed Cajun accordions
« Reply #25 on: July 10, 2010, 03:22:14 PM »

I don't agree that a using butt joint, where a mechanically stronger joint is not required given the expected use (holding on the lap or dangling from straps), is cutting any corners at all. It takes about the same amount of time to prepare four properly squared butt joints for glueup as it does to set up the shooting board with a donkey in order to dress the edges of two freshly mitred boards.

I do a lot of joinery by hand using traditional methods and I believe that your statement above leads to a conclusion that the mitering is an 'extra' process, not 'about the same amount of time.'  The butt jointed Cajun boxes require simple, repeatable table saw cuts that can even be done with a cheap contractor's saw or chop saw.  The long miters require more precision -- which could be done with a finer table saw, with a quality framemaker's trimmer, or with a shooting board as you mentioned.  I don't think that very many Cajun builders have even heard of a shooting board or have the skill to sharpen and hone a handplane to use with the shooting board.
Moreover, one can't just consider a single joint, but rather, the precision and time required to make all four boards and joints fit properly.  

Quote
I ask myself: What is it about an accordion that requires a mitre joint to be used for its casework over a reinforced butt joint? Aesthetics. So why not half blind dovetails? Why not mitred rabbet joints?

There is actually a good reason not to use the half blind dovetails -- the wall thickness of the accordion's box is really too thin for this wonderful joint.  And mitred rabbet joints ARE in fact used on some boxes, and I bet Jeff would approve of this!  There are also some other possible joints that would be practical as well as attractive for accordion frames.

Quote
A reinforced butt joint is just as strong for this purpose, otherwise we would be seeing $1200+ accordions at sessions everywhere which suffer from racking after heavy play (and we don't).

Correct, but what we do see are a lot of boxes that require metal hardware to hold together their butt joints.  And this makes for uncomfortable play for those of us who angle a one row box on the left thigh -- a common playing position for Quebecois box players.  The Mélodie has mitered joints, rounded at the corners, and is the most comfortable one-row box I've ever played.  So it is not necessary a purely aesthetic concern.
A friend of mine who repairs and tunes accordions shared a point of view about Cajun accordions that I find rings true.  They can be viewed as a form of naive folk art.  For some buyers, this has a special value (that is ALSO aesthetic) --- this explains the relatively high price for a box coming from Marc Savoy's workshop.  The builders are largely self-taught and have made accordions that serve the purposes of the kind of music played by Cajuns and some Zydeco and Creole musicians.  I can understand why some people admire them in the same way that I might admire a simple homemade banjo.
Maybe 6 or 7 years ago there was a Cajun builder who was offering boxes at a low price -- around $800.  One of the places were he was saving time was in applying the finish.  They were fairly ugly but there were individuals who felt that it was "purely aesthetic" and that the instruments would play just fine.  In fact there were positive reviews being posted on another forum.  It turned out that the people who liked the boxes and posted glowing comments had very little experience with quality boxes -- they had been playing Hohner Ariettes and such.  I recall that one fellow who had a stable of Castagnaris ended up ordering one and was fairly disappointed.  At any rate, I don't think that the builder is in business any more!
As far as the boxes in question on this thread, who knows how they sound and how they feel to play?
« Last Edit: July 10, 2010, 03:26:35 PM by Andy in Vermont »
Logged

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Tim Reed Cajun accordions
« Reply #26 on: July 10, 2010, 11:31:34 PM »

A mitre joint is but a butt joint made on an angle, with modern glues it should be no stronger.  Aesthetics are in the eye of the beholder but I've seen more bad mitres than butts.

If you're talking about woodworking then consider joints such as mitred mortice and tenons, hidden dovetails etc which give structural integrity to the joint (strictly speaking neither mitres or butts are joints to the purist).

BTW a biscuited jointed butt joint will be more stable than a pinned and glued mitre.

Steve
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Tim Reed Cajun accordions
« Reply #27 on: July 11, 2010, 04:51:41 AM »

A mitre joint is but a butt joint made on an angle, with modern glues it should be no stronger.  Aesthetics are in the eye of the beholder but I've seen more bad mitres than butts.
If you're talking about woodworking then consider joints such as mitred mortice and tenons, hidden dovetails etc which give structural integrity to the joint (strictly speaking neither mitres or butts are joints to the purist).
BTW a biscuited jointed butt joint will be more stable than a pinned and glued mitre.

These comments about hidden dovetails, and now biscuits, lead me to believe that some don't realize how thin the material is.  Also the mitered mortise and tenon makes no sense on the joint on an accordion.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Tim Reed Cajun accordions
« Reply #28 on: July 11, 2010, 05:21:40 AM »

Eenie  weeniee teenie little  biscuits...  butt biscuits no less...
End grain to long grain.. worst combination
End to end  ie  mitre... better and cleaner and no exposed end grain  for the ingress and egress of moisture
The "Cajun" made boxes usually have a wall thickness of 3/8ths of an inch
Most Euro and Quebec boxes are thinner

Butt or mitre... simple choice between the two...
there are other options  ( other than  eenie weenie teenie  butt biscuits)

Bad mitres are usually the result of bad equipment, poor skill level  but mostly the humidity of the wood at construction and or wide swings in ambient humidity

Why oh  why are most picture frames mitred when it is not necessary given the excuses   er  reasons. offered by the apologists
for butts ?    


"A mitre joint is a butt joint made on an angle"    (right)

A butt joint by definition is end grain to long grain which requires a single 90 degree cut.

An end grain glued to long grain ,then  stressed, will rip the long  grain right off.
« Last Edit: July 11, 2010, 05:28:37 AM by melodeon »
Logged

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Re: Tim Reed Cajun accordions
« Reply #29 on: August 25, 2010, 06:44:12 AM »

I almost weighed in, but then I figured why get all out of joint about joints. So Cheers instead.  :|glug
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

nfldbox

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 492
Re: Tim Reed Cajun accordions
« Reply #30 on: August 25, 2010, 12:55:57 PM »

As an "expert" in another field I am always so aware of how flummoxed anyone can be by experts.
The end result of the above is I know some new words--"shooting board"--but still have no idea whether butt joints on a cajun box are such a bad idea.
I must admit I prefer mitre to butt.
But I prefer parsnips to turnips, with much the same justification.
Logged
BC Cairdin
BC Hohner Double Ray
Bouchard en Ré

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Tim Reed Cajun accordions
« Reply #31 on: August 25, 2010, 03:41:53 PM »

Butt  joints are a bad idea on any accordeon, "Cajun" or not.
As to butt joints on a "Cajun" box...    there are other better options , and many "Cajun" builders use mitres.
It is simply a standout that the two most famous and prolific makers, namely Savoy and Martin ,use butt joints. and they are
among the most expensive. So, now along come the copiests who emulate their "hero" box makers and continue the mediocrity rather than take that extra little step and make a mitre joint.
Ever see a mitre joint on a Castagnari Melodeon... nope,  and it is the same price as some "Cajun" accordeons.

There will always be apologists, with other than logical reasons, to justify butts.

IMNSHO  there is no justification for a butt joint   (see previous posts)
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Tim Reed Cajun accordions
« Reply #32 on: August 25, 2010, 03:45:23 PM »

No one mentioned the 'historical' aspect of butt joints in accordion making!

Perhaps some early accordion makers who had a limited number of tools had to simplify the construction of their boxes, the most important was the sound and playability rather than sophistication of the joints! Hence some makers might still be using that technique for authenticity... Just an idea!

 
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Tim Reed Cajun accordions
« Reply #33 on: August 25, 2010, 05:41:18 PM »

A simple shop made mitre box....
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Tim Reed Cajun accordions
« Reply #34 on: August 25, 2010, 07:03:00 PM »


Ever see a mitre joint on a Castagnari Melodeon... nope,  and it is the same price as some "Cajun" accordeons.


Yo Jeff, I think you meant "butt joint"
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Tim Reed Cajun accordions
« Reply #35 on: August 26, 2010, 02:24:14 PM »

Yup..   thanks... 

let's try that again

ever see a butt joint on a Castagnari ?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tim Reed Cajun accordions
« Reply #36 on: August 27, 2010, 06:40:48 PM »

Even cheap Saxony built boxes with cheap timber and cheap brass reeds always have mitred corners.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: Tim Reed Cajun accordions
« Reply #37 on: August 27, 2010, 06:58:06 PM »

Even cheap Saxony built boxes with cheap timber and cheap brass reeds always have mitred corners.
That proves it then - mitres are cheap joints - nothing to fuss over.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Tim Reed Cajun accordions
« Reply #38 on: August 27, 2010, 07:41:44 PM »

Disregarding structural strength factors, a mitre joint leaves no exposed end grain so unless covering in sheet material, there need be no special finishing time taken to prepare and match the end grain when using a shellac or varnish finish.

The early 1900's Hohner I'm working on at present has mitred corners as does the relatively modern looking and 'bargain basement' end mini melodeon with one plate reeds which I have just denuded of the remnants of perloid covering, I'm not so certain of the Hohner's wood but I suspect birch and the mini is beech.

in the early to mid 1900's for most machine made / mass produced, non furniture domestic goods if you wanted looks you mitred, if looks were unimportant or to be veneered or otherwise covered then butt or half lapped seemed to predominate, if you wanted ultimate strength like battery boxes then the comb joint was favoured, ultimate strength and looks brought in the dovetail. Both butt and mitred joins were often strengthened by using an internal fillet or block (or by default another part glued across them)  and in the days of hot animal glues, assembly and hold while drying were also an important consideration.

Yes, I can also think of lots of exceptions  :D

Take the older box makers who survived and they must have got the balance of fitness for purpose versus cost right, as the price of labour rose and mechanisation became (perhaps) more affordable compromises have had to be made and we eventually end up with Chinese Hohners, I've hear lots about their perceived tonal deficiencies, some about their finish but nothing about their wholesale disintegration - something must be still working or we'd see the ends being injection moulded in some rigid plastic or foam.

So to modern makers, whichever joint they choose to use, if the box sounds and looks right it should sell, if you don't like the sound or it looks badly made, well you'll not pay top whack for it and the maker either compromises on price or improves quality or goes hungry.

Given their greater size were PA box ends made in the same way or not ?

Richard - who has just installed the latest version of Bills tuner and may attack the old Hohners bronze reeds tonight and try to teach them some manners - watch this space for Olympic class swearing or tears before bedtime :P
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Tim Reed Cajun accordions
« Reply #39 on: September 04, 2010, 05:28:51 PM »

Added to the list of Mitre Makers

... Zero Sette (one row 4 stop) and the bellows frame on my Dino Baffetti Black Pearl.

There's too much black paint and stuff to tell on the main body of the Baffetti and I don't want to start poking it and make it leaky.

I can confirm the wood is thin, but I think we've all seen that before.

From "bored of Coventry", not having got down to to Stowmarket today  :-\
Pages: 1 [2] 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal