Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: C#/D to D/D#  (Read 2122 times)

0 Members and 1 Guest are viewing this topic.

DoninOhio

  • Member
  • *
  • Offline Offline
  • Posts: 46
C#/D to D/D#
« on: July 28, 2010, 07:51:52 PM »

Well, I cannot locate a used D/D# box, but I do have a C#/D box. Can the current reeds be retuned 1/2 step to D/D#? A tuner stated it "cannot be done, and would be better to put new reeds in the box" (@ >$1000.00 cost). I was under the impression that reeds could be retuned (up) 1/2 step without causing major concerns r/t reed breakage.

Don
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: C#/D to D/D#
« Reply #1 on: July 28, 2010, 09:54:34 PM »

Half a step (a semitone) is fine.
C/C# reeds are often tuned up to C#/D.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: C#/D to D/D#
« Reply #2 on: July 28, 2010, 11:32:18 PM »

I agree, but if the reeds have already been tuned up from C#/D then another semitones up would be too far.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

DoninOhio

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: C#/D to D/D#
« Reply #3 on: July 29, 2010, 12:11:39 AM »

Theo:

The box is  a Weltmeister with original C#/D tuning. Anyone have recommendations for tuners in the states. I already know about Michael from Irishdancemaster, but would like others if known.

Don
Logged

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: C#/D to D/D#
« Reply #4 on: July 29, 2010, 12:48:28 AM »

Just wondering, what sort of effect would tuning reeds up a semitone have on the sound/tone quality and on the reed responsiveness and so forth? I'm thinking about tuning up my Saltarelle to C/C# next year when I get the B/C Gaillard but since it's a nice box I don't want to risk spoiling the reeds.

Luke.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: C#/D to D/D#
« Reply #5 on: July 29, 2010, 12:52:26 AM »

If done properly it will usually give a brighter sound.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: C#/D to D/D#
« Reply #6 on: July 29, 2010, 01:02:54 AM »

If done properly it will usually give a brighter sound.

Merci Beaucoup.

Luke.

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: C#/D to D/D#
« Reply #7 on: July 29, 2010, 05:31:05 AM »

If done properly it will usually give a brighter sound.

Rees,

I have seen boxes where retuning from C/C# to C#/D was done by tuning up every reed tongue, leaving the reeds extremely thin at the tips.  Although they were functioning well, my concern is that little metal was left for maintenance tuning as will always be necessary over the future life of that set of reeds.

I'm not much of an accordion tech, much more comfortable with concertina tuning.  As a concertina tuner and player I strongly prefer reed tongues that are not too thin at the tips.  So to carry this perspective over to the accordion question (perhaps inappropriately?) I tend to like the idea of moving the inside row reeds to the outside row and putting new reeds in for the inside row.

Always learning though, so I appreciate your different point of view that comes from more accordion experience.

PG
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal