Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Is that a metal fingerboard on your pokerwork?  (Read 1764 times)

0 Members and 1 Guest are viewing this topic.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Is that a metal fingerboard on your pokerwork?
« on: November 29, 2010, 12:27:59 PM »

Is that a metal fingerboard on your pokerwork? Nice (:) Lovely version as well, I think I prefer it to the standard one.
Its a wooden finger board with aluminium finger plate (work in progress). 

Cool. How have you done it? Considering doing the same for my Weltmeister, it would be useful CAD/CAm practice. We can use the water cutter in department if we give it an appropriate file. How have you finished it?
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Is that a metal fingerboard on your pokerwork?
« Reply #1 on: November 29, 2010, 01:00:49 PM »

Is that a metal fingerboard on your pokerwork? Nice (:) Lovely version as well, I think I prefer it to the standard one.
Its a wooden finger board with aluminium finger plate (work in progress). 
Cool. How have you done it?

I didn't do anything too fancy, just marked the holes which from memory are spaced 17mm between the rows, and 20mm along the rows.  I used a stepped hole cutter and drilled them to 14mm.  The buttons on my box are a bit "all over the place" and some of the holes needed to be opened out a little to clear the front or back of the key in its travel.  If you have access to a mill or something fancy, you'd maybe do the holes as 13mm wide by say 15.   

I used 1.5mm plate, but if I did it again I'd use 2mm or maybe even thicker, the limit being that the bottom of the button needs to be below the bottom of the plate, otherwise it catches on any felt bushing.

Maybe this should be moved to a new thread in "Construction"?
Logged
Tony S

ladydetemps

  • Emote Wizard
  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 3768
  • Castagnari Tommy D/G, Hohner 1 row 4 stop in C
    • My Youtube Channel
Re: Is that a metal fingerboard on your pokerwork?
« Reply #2 on: November 29, 2010, 01:16:25 PM »


Maybe this should be moved to a new thread in "Construction"?
your wish is my command. ;)

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Is that a metal fingerboard on your pokerwork?
« Reply #3 on: November 29, 2010, 01:48:00 PM »

Logged
Tony S

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Is that a metal fingerboard on your pokerwork?
« Reply #4 on: November 29, 2010, 06:29:20 PM »

Is that a metal fingerboard on your pokerwork........

.....or are you\just glad to see me? ;D
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal