Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Repair Hohner Pokerwork Treble Keyboard?  (Read 3480 times)

0 Members and 1 Guest are viewing this topic.

docEdock

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
  • Hohners, Gaillards, Castagnaris
    • LoafingAboard
Repair Hohner Pokerwork Treble Keyboard?
« on: December 24, 2010, 11:58:13 AM »

My Hohner A/D is going into do-it-yourself surgery in the hope that it gets better -- rather than worse. See photos 7 & 8  at http://picasaweb.google.com/docedoc123/Hohner?authkey=Gv1sRgCKCG2LWAu7rE2wE# for details about a keyboard crack that has me concerned.

I thought an bosca ceoil's advice excellent,

You should have asked some of these questions before you started the job (:) . . .

so, in that spirit, I have questions before I start hacking away.

Is the crack better left alone perhaps because it isn't life threatening whereas surgery may be?

What else is involved in freeing the keyboard other than removing the two screws shown in Photo 12 and perhaps depressing the treble buttons?
  
Once the keyboard is removed, is this a straight forward glue and clamp job? I imagine flexing the crack just a bit to open it and using a syringe to introduce a bead of Elmer's Carpenter's Wood Glue from the inside while shop-vacuuming a suction on the outer surface to encourage penetration. Any need to reinforce from the inside with a millimeter layer of fiberglass and epoxy?
« Last Edit: December 24, 2010, 11:59:50 AM by docEdoc »
Logged
How difficult can it be?
http://loafingaboard.blogspot.com/

docEdock

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
  • Hohners, Gaillards, Castagnaris
    • LoafingAboard
Re: Repair Hohner Pokerwork Treble Keyboard?
« Reply #1 on: December 24, 2010, 01:07:13 PM »

Humm, perhaps the quote should have been, "You should have searched more thoroughly before you posted."
Here are the photos on my facebook page.  This is a public link please let me know if you can't see them.
Shows how to remove the keyboard. Thanks Theo.
Logged
How difficult can it be?
http://loafingaboard.blogspot.com/

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Repair Hohner Pokerwork Treble Keyboard?
« Reply #2 on: December 24, 2010, 04:24:43 PM »

You are best placed to judge whether it needs doing!
It should be easy enough to stabilise the split in the back of the keyboard from inside and a piece of scrim embedded in epoxy might make less mess than fibreglass.
The crack at the end is almost certainly caused by the retaining screw, which is going to wedge open any repair when replacing it.
I think your best bet is to drill the screw hole out and glue in a dowel. This should also enable you to get more glue into the existing crack.
Logged

docEdock

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
  • Hohners, Gaillards, Castagnaris
    • LoafingAboard
Re: Repair Hohner Pokerwork Treble Keyboard?
« Reply #3 on: December 30, 2010, 11:00:11 AM »

I think your best bet is to drill the screw hole out and glue in a dowel. This should also enable you to get more glue into the existing crack.

Thanks for the tip. I do believe I'll remove the keyboard and peer at the inside. Perhaps that will help decide the next steps.
Logged
How difficult can it be?
http://loafingaboard.blogspot.com/

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Re: Repair Hohner Pokerwork Treble Keyboard?
« Reply #4 on: January 04, 2011, 11:47:20 PM »

Remove the keyboard and mask off around the seam of the crack with blue 3m painters tape. Use Medium CA glue to repair the crack. Make sure to have your clamp prepared ahead of time as you have little time to work with CA before it bonds. Apply as much of the glue as possible to the inside of the keyboard where it will not affect the finish. This should be sufficiant.
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

docEdock

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
  • Hohners, Gaillards, Castagnaris
    • LoafingAboard
Re: Repair Hohner Pokerwork Treble Keyboard?
« Reply #5 on: January 05, 2011, 12:42:21 AM »

Use Medium CA glue to repair the crack.

Medium CA glue? Does it go by another name?
Logged
How difficult can it be?
http://loafingaboard.blogspot.com/

sverba

  • Member
  • *
  • Offline Offline
  • Posts: 16
Re: Repair Hohner Pokerwork Treble Keyboard?
« Reply #6 on: January 05, 2011, 12:49:13 AM »



Cyanoacrylate = superglue
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Repair Hohner Pokerwork Treble Keyboard?
« Reply #7 on: January 05, 2011, 12:14:28 PM »

medium=medium viscosity
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Repair Hohner Pokerwork Treble Keyboard?
« Reply #8 on: January 05, 2011, 02:57:40 PM »

I would use a good wood glue personally over superglue, as it gives a little more room for error and timing. Superglue is fine if the crack is fresh and clean, but on something like this it can just end up bonding to the dust inside the crack. A wood glue has better gap filling properties.

Put the glue in the crack, clamp, and wipe any excess which squeezes out off with a damp cloth. If it's cracked all the way through you can do it from the inside at the same time. A blunt knife can be used to help open the crack from the inside to massage the glue all of the way in.
Logged

docEdock

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
  • Hohners, Gaillards, Castagnaris
    • LoafingAboard
Re: Repair Hohner Pokerwork Treble Keyboard?
« Reply #9 on: January 05, 2011, 03:20:15 PM »

Cyanoacrylate = superglue

medium=medium viscosity

Oh, THAT STUFF. Thanks for the clue. I had CA as construction adhesive and was headed out to buy a tube of the glop.
Logged
How difficult can it be?
http://loafingaboard.blogspot.com/

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repair Hohner Pokerwork Treble Keyboard?
« Reply #10 on: January 05, 2011, 03:51:24 PM »

I would use a good wood glue personally over superglue, as it gives a little more room for error and timing.

Agreed, but the one situation where I prefer superglue is when repairing a crack that only extend part way through a piece and I can't to open up the crack to get the glue in.   Superglue will capillary itself deep into a fine crack. This is typically the situation with wooden Hohner fingerboards that crack along the grain through the screw holes.
« Last Edit: January 05, 2011, 03:52:58 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

docEdock

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
  • Hohners, Gaillards, Castagnaris
    • LoafingAboard
Re: Repair Hohner Pokerwork Treble Keyboard?
« Reply #11 on: January 06, 2011, 11:31:18 AM »

Thanks for all the advice. My G/C's arrived so I'm finally ready to put this A/D under the knife.

My own experience with CA is that I end up permanently bonded to the piece and end up leaving my fingerprints behind -- literally. I'll post pictures if I can still type.
Logged
How difficult can it be?
http://loafingaboard.blogspot.com/
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal