Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4   Go Down

Author Topic: Pokerwork clacking  (Read 16064 times)

0 Members and 1 Guest are viewing this topic.

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Pokerwork clacking
« Reply #20 on: September 23, 2009, 09:28:03 PM »

The Morris Grip is only standard on the English made pokers you see... normally all you see is a knackered Morris man gripping the keyboard with all his might just in case a stray wind were to pick the melodeon up and blow it away. (I was meaning the behind of the keyboard which usually has a players thumb attached to it... perhaps its a southern thing to call it the Morris grip)
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pokerwork clacking
« Reply #21 on: September 23, 2009, 10:25:33 PM »

Here are the photos on my facebook page.  This is a public link please let me know if you can't see them.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: Pokerwork clacking
« Reply #22 on: September 23, 2009, 10:27:08 PM »

So fast! I am at work, will be studying this at home. This seems "sticky worthy"
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pokerwork clacking
« Reply #23 on: September 23, 2009, 10:34:01 PM »

but did hear that it was feasible to fit felt into the keyboard by removing it and the pallets together.

It is possible, but doing it that way gives you a lot of extra work.  You have to release all the springs, remove the screws that hold the action in which is fairly straightforward.  But once you have the felt and buttons inserted the fingerboard gets in the way and its all but impossible to get the little tiny screws back that hold the mechanism, also harder to get the screws back.  You could leave the springs in position, but that risks the spring tension tearing the screws out enlarging their holes, and you have to devise some way to compress the springs while you put the whole thing back.  Its fun! ;D

Quote

Mind you I have a lot to learn, still have to find out how to fit new bushes to the treble end?
Regards, Bruce

New bushes?  There are no bushes that I know of in the treble end. ???
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Pokerwork clacking
« Reply #24 on: September 24, 2009, 12:02:38 AM »

I have seen some solutions on Irish Dancemasters site:  a custom pad and two custom replacement keyboards, one with removable top.  Seems reasonably priced.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: Pokerwork clacking
« Reply #25 on: September 24, 2009, 01:48:08 AM »

And now for something completely different:

I have installed two of the keyboards from Irish Dancemaster -- one lyre-shaped on my pressed wood Pokerwork, and one of the more modern shape on my Erica. (Both painted black to duplicate the look of the original keyboards.) I like this modification quite a lot, and these are a very nice product.

Next project in line, though, was a another honey-colored Pokerwork for a friend of mine. The original pressed wood keyboard was in quite nice condition, and she wanted to keep that, but she really liked the improvements in playability of my Dancemaster keyboards. What to do?

I put a very narrow kerf blade in my bandsaw, and carefully set up a fence that allowed me to neatly slice off the top of the keyboard, with minimal loss in dimension.  Next, I lightly sanded the sawn faces to make a nice join between them again, then drilled and countersunk some holes for tiny flathead screws to re-secure the top.  This allows for easy removal/replacement of the keyboard top, and for installation and adjustment of the felt pads. Looks neat, works well, and keeps the original parts. (Although I must admit that my heart was in my throat just a bit, doing this to someone else's instrument.)

I have only one overall photo of it that I can attach here. When I return from holiday, I'll make some photos of it disassembled, if anyone is interested.

Bob
Logged

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: Pokerwork clacking
« Reply #26 on: September 24, 2009, 06:02:50 AM »

Looks fantastic, the srews are not too intrusive. If not for the action on these pokerworks.. guess that's why the Morgane developed? I imagine it has better action than off the shelf Pokerwork.
« Last Edit: September 24, 2009, 06:04:42 AM by stevejay »
Logged

HallelujahAl

  • Guest
Re: Pokerwork clacking
« Reply #27 on: September 24, 2009, 07:22:25 AM »

Quote
Here are the photos


Theo thanks so much for the pictures and description of how you limit the button travel - superb stuff and extremely helpful to a raw amateur like me!
AL
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pokerwork clacking
« Reply #28 on: September 24, 2009, 08:44:49 AM »

Looks fantastic, the srews are not too intrusive. If not for the action on these pokerworks.. guess that's why the Morgane developed? I imagine it has better action than off the shelf Pokerwork.

Bob,  did you consider taking the back off the fingerboard?  I can think of two possible advantages, 1 - screws are out of sight, 2- back could be removed while the fingerboard is in situ to adjust the thickness of the packing.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Pokerwork clacking
« Reply #29 on: September 24, 2009, 08:47:23 AM »

Here are the photos on my facebook page.  This is a public link please let me know if you can't see them.
Brilliant!   That does it, mine's coming apart tonight.    I think my action is held with nuts and bolts, so its actually not too difficult taking it on/off with the springs tensioned.

By the way, does anyone know how much a replacement fingerboard costs?  Just the ordinary black plastic one on the Pokerwork?
Logged
Tony S

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Pokerwork clacking
« Reply #30 on: September 24, 2009, 09:05:54 AM »

Here are the photos on my facebook page.  This is a public link please let me know if you can't see them.
Brilliant!   That does it, mine's coming apart tonight.    I think my action is held with nuts and bolts, so its actually not too difficult taking it on/off with the springs tensioned.

By the way, does anyone know how much a replacement fingerboard costs?  Just the ordinary black plastic one on the Pokerwork?

Don't know about the plastic ones but you could look here for repalcement wooden ones

http://www.irishdancemaster.com/reedtuning.html

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pokerwork clacking
« Reply #31 on: September 24, 2009, 09:16:47 AM »


By the way, does anyone know how much a replacement fingerboard costs?  Just the ordinary black plastic one on the Pokerwork?

£21.99
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Pokerwork clacking
« Reply #32 on: September 24, 2009, 10:38:13 AM »

Here are the photos on my facebook page.  This is a public link please let me know if you can't see them.
Brilliant!   That does it, mine's coming apart tonight.    I think my action is held with nuts and bolts, so its actually not too difficult taking it on/off with the springs tensioned.

If you are going to attempt the modification shown there is no reason to remove the action anyway!
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Pokerwork clacking
« Reply #33 on: September 24, 2009, 11:57:22 AM »

Looks neat, works well, and keeps the original parts. (Although I must admit that my heart was in my throat just a bit, doing this to someone else's instrument.)

That is a really nice job if you have the tools and, perhaps more important, the nerve to attempt it!
Have to agree with Theo that, if modifying an existing keyboard, it might be even better to take the back off, rather than replicating the Dancemaster items. I suspect that these are somewhat easier to produce  this way than with a removable back, besides following the old Hohner style.
I see that Dancemaster also offer a "bi-level" pad to go into Erica keyboards, fitted for $35. I guess that to get this in they must have to remove the action and keyboard as one, together with the "fiddly"work it involves. What has previously put me off trying this idea is the trial and error of determining the correct thickness and type of material to use. Since they seem to have already done the "development", before I ask them, do you suppose they would be prepared to supply materials only? (They advertise the keyboards as a fitted service so were they happy to supply you with the ones you fitted?)
Regards, Bruce
Logged

juker

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 838
  • Hohner 2 row G/C and C/F,
    • Julie's Art'nAll
Re: Pokerwork clacking
« Reply #34 on: September 24, 2009, 12:04:00 PM »

Most of the noise my pokerwork makes is the pallets whacking against the wood 'soundboard'....especially on the bass side.  I've never had problems with the button levers slamming against the fingerboard.

Coincidentally I was just thinking about exactly the same subject, and wondering whether to post a question.

On mine the buttons have to be pushed a good 1/4" below the surface of the fingerboard board before hitting anything, but the noise comes when the buttons are released.   I did try putting something under them to reduce the travel, trouble was that if was thick enough to stop the buttons depressing below the surface, I could get the action re-assembled.   I used the "dowel-across-the-action" method for a bit, but found the levers starting to bend although I wouldn't say I was rough on the instrument.   I did like the reduced travel, but started to come to the conclusion I'd either need to leave it as-is or make a new fingerboard.

Tony S

Yes, the noise on mine comes when the buttons are released too. I didn't notice it was 'clacky' until I listened to the video of myself I made for youtube - I don't know anyone else who plays a box, so nothing to compare my sound to. Do any of these ideas improve the clackiness that comes from the buttons hitting the fingerboard? Both treble and bass buttons make a noise on my Hohner.
Logged
I don't get 'jigs'

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pokerwork clacking
« Reply #35 on: September 24, 2009, 02:16:01 PM »

Yes, the noise on mine comes when the buttons are released too. I didn't notice it was 'clacky' until I listened to the video of myself I made for youtube - I don't know anyone else who plays a box, so nothing to compare my sound to. Do any of these ideas improve the clackiness that comes from the buttons hitting the fingerboard? Both treble and bass buttons make a noise on my Hohner.

That noise on releasing the buttons is caused by the pallets, with thin leather facing, hitting the base board.   The solution to this is to re-face the pallets with a softer material - leather with a layer of felt underneath.  I feel another set of photos may be needed.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: Pokerwork clacking
« Reply #36 on: September 24, 2009, 02:32:05 PM »

Theo -- Thanks for the suggestion to remove the back rather than the front.  Although the screws are quite flush and I don't mind their appearance at all, it's pretty easy to see the adjustment advantages offered by the removeable back. I suppose I was just rather automatically following the method shown by Dancemaster and some of the Hohners I've seen. Next time, I'll definitely have a look at doing it on the backside.

Bruce -- The Dancemaster keyboards that I ordered are both very nice pieces. The first one came with the bi-level felting already installed, while the second was shipped without. When I inquired why, I was told that "professional installation is recommended", but if I wished to do it at home, I could just go buy some self-stick furniture felt. So that's what I did, and it worked just fine. The felt beneath the shorter levers was secured over a very thin strip of wood (perhaps 1/32"?) in order to have both rows come to rest at the same level relative to the top of the keyboard.

At the same time, I also renewed the pallet facings, replacing the old leather with 2mm felt+suede. Pallets were removed from the rods then, and reglued so as to assure that they were flat against the board.

The bass side pallets received the same treatment, and the button holes were enlarged enough to be bushed with some suede leather. One other noise maker I found on that side was the juncture where the button rods connect to the pallet levers -- the u-bend was rather loose around the levers, and produced a little clatter with sharp taps on the buttons. I used some needle-nose pliers to very gently squeeze these u-bends down a bit, making a tighter fit with the pallet levers, and placed one drop of silicone lube at that point.

All these things, taken together, have produced what I think is a relatively quiet instrument. (Although there's not much going on around these parts to which I can compare!)

Bob
« Last Edit: September 24, 2009, 04:06:32 PM by RGF »
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Pokerwork clacking
« Reply #37 on: September 24, 2009, 03:12:47 PM »

In my experience, all of the noises a pokerwork makes are quite variable depending on your technique.  It is possible to play a pokerwork without much noise at all if you have a light touch on the buttons and if you do not let them 'pop' back upon release.  Limiting the button travel by some physical means just makes it easier to accomplish this.
Logged

Matthew B

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 894
Re: Pokerwork clacking
« Reply #38 on: September 24, 2009, 03:52:19 PM »

This places a strip of soft wood under the levers beneath the fingerboard.  The pictures will make it clear.

Theo, very helpful.  Thanks.  From what I see you are suggesting that sometimes just the initial pressure on the button when the wooden strip is first positioned (Image 11) will make enough of an indentation to open the pallet, and limit the button travel, if you start with the strip flush against the lever?  If the wood is that soft, doesn't the dent get bigger over time, particularly in the busy bits of the key board? Or are you cutting out a deeper slot every time?
Logged
Charter Member Presumpscot and Fore River Accordion Club

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Pokerwork clacking
« Reply #39 on: September 24, 2009, 04:24:06 PM »

RGF  ,

Is it possible to post pictures of these  retrofit keyboards ?

Specifically the "lyre" shaped one ?
Logged
Pages: 1 [2] 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal