Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Air Button Conversion  (Read 3986 times)

0 Members and 1 Guest are viewing this topic.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Air Button Conversion
« on: May 30, 2008, 07:10:33 PM »

Anyone got any good ideas on converting the air button from in-out Italian style to up-down Hohner style?

I've fallen in love with the D/D# Galanti that I have on my website but the air button drives me crazy.

I did a similar conversion on a Paolo Soprani but was not entirely happy with the method I used.
Any special tricks up anyones sleeve?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Air Button Conversion
« Reply #1 on: May 30, 2008, 07:23:30 PM »

Just fit an air button from a Hohner?  Or perhaps there is not enough space.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Air Button Conversion
« Reply #2 on: May 30, 2008, 08:11:37 PM »

Yes, that might work. Do you have a spare one Theo?
I can't find anything suitable among my piles of accordion debris.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Air Button Conversion
« Reply #3 on: June 02, 2008, 12:03:50 AM »

Do you still want one? Not pristine, but functional  & FOC
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Air Button Conversion
« Reply #4 on: June 02, 2008, 12:55:03 AM »

Thank you sire, that would be very kind. I'll buy you a pint.

Address on my website at www.melodeons.com
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

c2aminor

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Air Button Conversion
« Reply #5 on: June 02, 2008, 01:58:19 AM »

I played a Hohner Erica for many years before I got my Castagnari Nik. I couldn't get used to the in/out air button of the Castagnari so I changed it to the up/down style of the Hohner. I took off that plastic wedge shaped air button, so that just left the stiff wire that it was attached to. I took a pair of pliers and bent that wire 90 degrees so it stuck up about as far as the Hohner button. You should actually use 2 pairs of pliers when you bend that -one to hold the part that you bend up and the other to hold steady the part that you don't bend so you don't wreck the whole mechanism. So now, on that wire that is sticking up, take a short piece of wood dowel about the size of the Hohner air button, drill a hole in one end the size of the wire, and round off the other end. Put a little glue in the hole, and stick it on the wire. That's it - now it works just like the Hohner up/down button. I have a Mengascini that I'd like to do the same thing to, but the mechanism is a bit different than the Castagnari, so my bending method won't work on that. I've just gotten used to playing it the way it is, but I still like the Hohner style air button best.

Rich
Logged

Robin Harrison

  • Good talker
  • **
  • Offline Offline
  • Posts: 94
Re: Air Button Conversion
« Reply #6 on: June 04, 2008, 12:03:34 AM »

I had a Tommy that I converted to the Hohner style air release.............I have some photos I took if you haven't yet done the conversion.It was fairly crude but totally effective.
              Regs Robin
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Air Button Conversion
« Reply #7 on: June 04, 2008, 08:44:15 AM »

Thank you all for your input.
an bosca ceoil has kindly sent me a Hohner air button - many thanks.
Now tomglos has bought the Galanti - doh!
I would still be interested in seeing the photos of your conversion, Robin.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal