Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4 5   Go Down

Author Topic: Metal strap between reedblocks...?  (Read 17522 times)

0 Members and 1 Guest are viewing this topic.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Metal strap between reedblocks...?
« Reply #20 on: August 31, 2011, 10:54:53 PM »

I am fascinated by this phenomeneoemenem

This is Welsh thing isn't it? Why use six letters when you can squeeze twenty seven in ...

Quote
and have been experimenting with reed-blocks made from Rachel's Organic Yogurt.
:o Oh, the stench!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Metal strap between reedblocks...?
« Reply #21 on: August 31, 2011, 10:56:41 PM »

Now that idea could be extended - the edible melodeon.  So Rees is building the fermented milk based reedblocks,  I'll offer turned hazlenut buttons and rice paper bellows.  Any offers for the case?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Metal strap between reedblocks...?
« Reply #22 on: August 31, 2011, 11:02:30 PM »

Now I'd have thought that if you really must go down the dairy route then something like Parmesan would probably be more suitable for the reedblocks and probably holds screws better if you want to go with a wax-free design.

...I think I've got some Kendal mint cake that'd do nicely for the case....
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Metal strap between reedblocks...?
« Reply #23 on: August 31, 2011, 11:05:55 PM »

Amendment - it was a good thread.  :P
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Metal strap between reedblocks...?
« Reply #24 on: August 31, 2011, 11:27:35 PM »

Peter Hyde uses foam, do you think a Victoria sponge would work?

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Metal strap between reedblocks...?
« Reply #25 on: August 31, 2011, 11:36:03 PM »

I need to discover/go out and hunt for some little screws though. None of the ones in my toolboxes are quite small enough. I'll have to wait a day or two to see what it does for my three voice box.

Last time I needed tiny screws (for a bass lever on my 1-row) I found something just about small enough at a wind instrument repair shop in Cambridge. Mind you I hadn't heard of CGM then...
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Metal strap between reedblocks...?
« Reply #26 on: August 31, 2011, 11:53:12 PM »

do you think a Victoria sponge would work?

The texture would be too open I think, screws would tend to pull out fairly quickly. Thinly sliced it might work as a grille cloth though.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Metal strap between reedblocks...?
« Reply #27 on: September 01, 2011, 12:22:18 AM »

Edit:
I guess the science behind this is that the sound generation of the free-reed set-up is caused by the reed tongue 'chopping' the airstream into packets. The more rigid the reed-block structure, then the more energy will be transfered to the moving airstream. In a poorly supported, 'sloppy' reed-block structure, some of the energy from the reed tongue will be wasted as it goes into making the reed block vibrate, leaving less energy available to be transfered to the airstream. So ideally the reed-block assembly needs to be as rigid as possible. I wonder how it would perform if the whole set of reed-blocks were to be cast/machined/3D-printed out of a single starting piece with supporting struts at each end and in the middle?


True, although remember that the sound of a pure siren tone is not necessarily pleasant... a lot of the timbre does come from the body. Whether that is absorption or resonance of course I have no idea, but I think that it's a mistake to assume that an utterly rigid, utterly reflective casing is the perfect solution.

Interesting theory about the reedblocks Anahata, makes a lot of sense (:)

All the real quantitative work that has been done suggests that more rigidity and reflectivity is best for free-reed instruments, the last thing you want is resonances absorbing energy from or coupling with the reed (which is exactly the problem that the strap solves).

Normally the reed blocks are only clamped to the case at the ends, and the reed which have the "warble" problem usually seem to be towards the middle of the block where it's least rigid, so my suspicion is that the problem is a torsional resonance along the reed block (which one of the notes is almost bound to hit) excited by the beating between the two reeds on opposite sides of the block. This will also be made worse because the reeds are mounted "tips-up", so the  forces are generated at the top of the block where the main reed movement is -- if so, "tip-down" mounting would help but may cause other problems.

So anything that braces or damps the middle of the block against twisting will probably fix the problem -- the "best" solution would probably be a strap that not only linked the blocks but continues downwards to the strong point in the corner where the soundboard meets the case.

I appreciate that coupling modes would indeed be a problem and understand why this solves them. From this it is simple to deduce that a casing which can be treated as a single body, rather than many coupled bodies is an ideal. I am not sure about the reflective bit. By having a casing which has a particular absorption spectrum you are changing the timbre of the sound that is being produced, no? If you say that reflective is the best then that implies that the sound given by a reed on its own, or in a chamber is the ideal. I find the sound of reeds in blocks being excited rather harsh and find that the absorption of the casing makes a beneficial effect. I know that others have said things about grille cloths and absorption properties. Always ready to be proved wrong though.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Metal strap between reedblocks...?
« Reply #28 on: September 01, 2011, 01:27:52 AM »


 I find the sound of reeds in blocks being excited rather harsh and find that the absorption of the casing makes a beneficial effect. I know that others have said things about grille cloths and absorption properties. Always ready to be proved wrong though.

I agree....naked reeds do sound pretty harsh. The sound of a particular box is merely the sum of all attributes; Shape, volume, cabinet materials, reed quality, block and chamber design,etc. I guess we're on a quest to find what conditions make them sound in an 'undesireable' manner. In this case, it is apparent to me that reeds need to 'hook up' with one another to produce a strong, unified, "in tune" sound. We know it when we hear it. We know what it sounds like if this is missing.
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Metal strap between reedblocks...?
« Reply #29 on: September 01, 2011, 02:17:21 AM »

Quote
Quote from: Andrew Wigglesworth on Yesterday at 09:46:19 PM
I need to discover/go out and hunt for some little screws though. None of the ones in my toolboxes are quite small enough.

Yes....they are quite difficult to find these days. Slightly less scarce than hand-forged nails! Although CGM offers an assortment. If you find other sources, please post!

House of Musical Traditions in Maryland has a selection of various screws that are useful for accordion repair, sold in a batch. (edit: Here is a link, it's toward the bottom of the page. http://www.hmtrad.com/catalog/winds/sbx/sbx-part.html )

Otherwise, Ace Hardware is the best place around here for weird screws. My local Home Depot and Lowe's stores are useless for anything not featured in a Bob Vila program.

No tremolo problems, but I had a similar problem with mushy tones and overpowering basses from an old Hohner two-row box. I took out the reed blocks from both ends and found someone had glued what looked like pallet felt/leather to the base plates of each, maybe to prevent against leaks? But both base plates were perfectly flush with the mating surface so I removed the felt and tightened the screws holding down the blocks. No leaks and presto, the sound was "in focus" as you described.
« Last Edit: September 01, 2011, 02:22:51 AM by Christopher K. »
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Metal strap between reedblocks...?
« Reply #30 on: September 01, 2011, 01:36:09 PM »


 I find the sound of reeds in blocks being excited rather harsh and find that the absorption of the casing makes a beneficial effect. I know that others have said things about grille cloths and absorption properties. Always ready to be proved wrong though.

I agree....naked reeds do sound pretty harsh. The sound of a particular box is merely the sum of all attributes; Shape, volume, cabinet materials, reed quality, block and chamber design,etc. I guess we're on a quest to find what conditions make them sound in an 'undesireable' manner. In this case, it is apparent to me that reeds need to 'hook up' with one another to produce a strong, unified, "in tune" sound. We know it when we hear it. We know what it sounds like if this is missing.

If you want a "softer" sound then a heavier grille cloth can usually provide this, or even something heavier -- some concertinas used to have a leather sheet underneth the fretwork, on standoffs so at least some sound escaped.

OTOH if the sound has already been absorbed inside the instrument you can't get it back, and there's also the risk that if more sound is absorbed inside it's more likely to excite undesirable resonances in the reed blocks/body. It's been mentioned that some accordion makers use a hard varnish on the reed blocks and inside the case which will decrease absorption (same reason as you need to varnish wooden treble horns for speakers, should you ever make one).

Surely the point is that you don't want reeds "hooking up" with each other, this is the resonant coupling that reed block straps are trying to remove?

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Metal strap between reedblocks...?
« Reply #31 on: September 01, 2011, 02:46:07 PM »

If you want a "softer" sound then a heavier grille cloth can usually provide this, or even something heavier -- some concertinas used to have a leather sheet underneth the fretwork, on standoffs so at least some sound escaped.

OTOH if the sound has already been absorbed inside the instrument you can't get it back, and there's also the risk that if more sound is absorbed inside it's more likely to excite undesirable resonances in the reed blocks/body. It's been mentioned that some accordion makers use a hard varnish on the reed blocks and inside the case which will decrease absorption (same reason as you need to varnish wooden treble horns for speakers, should you ever make one).

Surely the point is that you don't want reeds "hooking up" with each other, this is the resonant coupling that reed block straps are trying to remove?

Ian

Perhaps my choice of words is inappropriate. I think the term 'focus' is closer. I have already tried the damping route using felts, cardboard baffles, and even experimented with changing the air-flow to the left side reeds. None of these were the solution. Rather than regulating volume, I needed to eliminate distortion that was present. Apparently, this is one of the benefits of the straps...they seem to mitigate unwanted overtones produced by unstable or resonant parts (the reedblocks in this case) that are adding an undesirable element to the sound.  For me, it cured the problem  ;D
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Metal strap between reedblocks...?
« Reply #32 on: March 12, 2012, 06:29:11 PM »

Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Metal strap between reedblocks...?
« Reply #34 on: March 12, 2012, 06:40:06 PM »

It's hard enough to play without having to stand on a teeter-board as well........ ;D
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Metal strap between reedblocks...?
« Reply #35 on: March 12, 2012, 06:46:39 PM »

Synchronicity...

http://www.youtube.com/watch?v=Klw7L0OZbFQ

You can even see the middle one trying to move out of synchronisation and being pulled back -- just like the horrible pulling-in-and-out-of phase warbling sound you get with reed blocks with the problem under discussion...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Metal strap between reedblocks...?
« Reply #36 on: March 12, 2012, 08:13:26 PM »

You can even see the middle one trying to move out of synchronisation and being pulled back -- just like the horrible pulling-in-and-out-of phase warbling sound you get with reed blocks with the problem under discussion...
In this particular experience it seems to be more about a "majority wins" effect, but we can definitely see how waves can interact and interfere with each other.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Metal strap between reedblocks...?
« Reply #37 on: March 12, 2012, 10:18:53 PM »

You can even see the middle one trying to move out of synchronisation and being pulled back -- just like the horrible pulling-in-and-out-of phase warbling sound you get with reed blocks with the problem under discussion...
In this particular experience it seems to be more about a "majority wins" effect, but we can definitely see how waves can interact and interfere with each other.

yes, and as more become sync-ed, perhaps the quicker it all happens. Seems like a good reason for dry tuning...the reeds tend to be somewhat bound to staying in step.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Metal strap between reedblocks...?
« Reply #38 on: March 12, 2012, 11:32:27 PM »

You can even see the middle one trying to move out of synchronisation and being pulled back -- just like the horrible pulling-in-and-out-of phase warbling sound you get with reed blocks with the problem under discussion...
In this particular experience it seems to be more about a "majority wins" effect, but we can definitely see how waves can interact and interfere with each other.

yes, and as more become sync-ed, perhaps the quicker it all happens. Seems like a good reason for dry tuning...the reeds tend to be somewhat bound to staying in step.

The problem is that the closer the reeds are tuned the more prone they are to jumping in and out of synchronisation if there's any coupling between them instead of the phase gradually and smoothly drifting past each other -- in weakly coupled oscillators this is called "mode locking" and is usually avoided at all costs, because the slipping in and out of lock is partly random leading to uneven beat rates.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Lyra

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 558
Logged
Pages: 1 [2] 3 4 5   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal