Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3] 4 5   Go Down

Author Topic: Metal strap between reedblocks...?  (Read 17569 times)

0 Members and 1 Guest are viewing this topic.

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Metal strap between reedblocks...?
« Reply #40 on: March 13, 2012, 04:44:19 PM »

(...) Seems like a good reason for dry tuning. (...)
Or very wet! Maybe that's why Hohner uses dripping-wet tuning...
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Metal strap between reedblocks...?
« Reply #41 on: March 14, 2012, 10:35:43 AM »

Synchronicity...

http://www.youtube.com/watch?v=Klw7L0OZbFQ
I think this makes one very important point very clear and that is for this to happen the system needs some compliance, some movement.
With my production engineers hat on just attaching the reed blocks at the ends i.e. one end wedged and the other screwed down is, in almost all cases, good enough but with just my engineers balding head it has always seemed to me that I would like to see the reed blocks screwed or clamped down in the centre as well.
Logged
aka malodeon

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Metal strap between reedblocks...?
« Reply #42 on: March 14, 2012, 10:40:08 AM »

with just my engineers balding head it has always seemed to me that I would like to see the reed blocks screwed or clamped down in the centre as well.

Some accordions do have fixings in the centre too.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Online Online
  • Posts: 1703
  • Too many melodeons...
Re: Metal strap between reedblocks...?
« Reply #43 on: March 14, 2012, 08:31:22 PM »

with just my engineers balding head it has always seemed to me that I would like to see the reed blocks screwed or clamped down in the centre as well.

Some accordions do have fixings in the centre too.

Last time we talked about this my conclusion was that a torsional resonance along the length of the block was the most likely mechanism. Just screwing the middle of the block down to the pallet board might have some effect depending on whether the board is flexing with the block or not; in any case the block is probably a lot stiffer than the board so it wouldn't help much, since stiffness depends on the square of thickness -- even allowing for chambers and narrower width, a 50mm tall reedblock is probably at least 10x stiffer than a 5mm thick pallet board.

What is needed is to brace the middle of the top of the block so it can't move sideways; a strap to another block helps (assuming the other block resonates differently which is very likely), extending this strap down diagonally to the corner strongpoints where the pallet board meets the case would be better still.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Metal strap between reedblocks...?
« Reply #44 on: March 14, 2012, 10:38:40 PM »

"Last time we talked about this my conclusion was that a torsional resonance along the length of the block was the most likely mechanism"

To my mind the two likely ways that the reed block can move are:
a)   due to the compliance of the gasket material between the block and the soundboard.
b)   torsional bending of the base of the reed block (the thin part) where it is attached at the ends
The sound board may only be 5mm thick (4mm on my pokerwork) but where the reed blocks are attached it is close to the side walls of the box and has thick blocks of wood glued to it to clamp the reed blocks to and so is very stiff.

Finally, by experimentation, pushing the top of the reed block sideways in the centre shows some lateral movement with no discernable flexing of the sound board. Further pushing on the sound board with much greater force resulted in no discernable flexing.
So by adding three small screws to clamp the edges of the two reed blocks, at their mid points, to the sound board would result in a much stiffer assembly.
Logged
aka malodeon

IanD

  • Hero Member
  • *****
  • Online Online
  • Posts: 1703
  • Too many melodeons...
Re: Metal strap between reedblocks...?
« Reply #45 on: March 14, 2012, 11:28:54 PM »

"Last time we talked about this my conclusion was that a torsional resonance along the length of the block was the most likely mechanism"

To my mind the two likely ways that the reed block can move are:
a)   due to the compliance of the gasket material between the block and the soundboard.
b)   torsional bending of the base of the reed block (the thin part) where it is attached at the ends
The sound board may only be 5mm thick (4mm on my pokerwork) but where the reed blocks are attached it is close to the side walls of the box and has thick blocks of wood glued to it to clamp the reed blocks to and so is very stiff.

Finally, by experimentation, pushing the top of the reed block sideways in the centre shows some lateral movement with no discernable flexing of the sound board. Further pushing on the sound board with much greater force resulted in no discernable flexing.
So by adding three small screws to clamp the edges of the two reed blocks, at their mid points, to the sound board would result in a much stiffer assembly.


Agreed, if the gasket has compliance and the pallet board (yes I refuse to use the s-b word...) is sufficiently stiffened by blocks braced to the case, screwing down the middle of the blocks will help.

But if you're just screwing it down onto the pallet board via the gasket this will still not help much, you'd need to screw the reed block directly to the stiffening blocks to "short-circuit" the gasket compliance.

And in the end, a metal strap across the blocks and screwed down into the corner strongpoints will still provide a lot more torsional stiffness if you analyse the forces involved and how they get fed into the case. Even things that look rigid or feel it to the touch aren't when you analyse resonances in the hundreds of Hz to kHz range.

Ian

P.S. Yes I did structural and mechanical engineering as well as properties of materials :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Metal strap between reedblocks...?
« Reply #46 on: March 15, 2012, 06:21:00 AM »

I should have made it clear Ian that I agree with both the strap across the blocks and screwed down to the Pallet board and any thing which gets away from the idea of a sound board but I just find the strap inelegant.

My logic for screwing the reed blocks in the center is that the pallet board will be very stiff, being rigidly fixed into a section of tube that forms the case of the treble side so the screws will increase the stiffness of the assembly and so shift its resonant frequency up and out of the range of this effect. Putting my old production engineers hat back on this saves you a strap and one screw.

It would be interesting to know if this is more of a problem with longer reed blocks and less of a problem with blocks glued to the pallet board.
Logged
aka malodeon

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Metal strap between reedblocks...?
« Reply #47 on: March 15, 2012, 07:40:05 AM »

I just find the strap inelegant.

Inelegant?

It is simple,
It works.

From an engineering point of view I call that elegant.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Metal strap between reedblocks...?
« Reply #48 on: March 15, 2012, 08:38:15 AM »

From my experience, screwing the reed blocks in the center, apart from certain constructional issues that may present themselves, will not make the resonance straps obsolete. I've encountered a wobbly tremolo and  related phenomena in cases where the blocks were solidly glued on to the sound board (no bottom, no gasket, no screws). Again, the problem is rapidly solved by attaching a strap. I use the small parts (no idea what they could be called in English) that usually make part of the register in chromatic instruments.  There is a small hole in either end and they can be had in different convenient lengths from Carini. They may even look a bit more elegant than some straps.
« Last Edit: March 15, 2012, 12:52:21 PM by diatonix »
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Metal strap between reedblocks...?
« Reply #49 on: March 15, 2012, 08:40:56 AM »

Even the much disparaged Chinese Pokerworks come with them fitted  ;)

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Metal strap between reedblocks...?
« Reply #50 on: March 15, 2012, 09:33:47 AM »

but I just find the strap inelegant.
You could always paint miniature flowers on it.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Metal strap between reedblocks...?
« Reply #51 on: March 15, 2012, 05:14:48 PM »

From my experience, screwing the reed blocks in the center, apart from certain constructional issues that may present themselves, will not make the resonance straps obsolete. I've encountered a wobbly tremolo and  related phenomena in cases where the blocks were solidly glued on to the sound board (no bottom, no gasket, no screws). Again, the problem is rapidly solved by attaching a strap. I use the small parts (no idea what they could be called in English) that usually make part of the register in chromatic instruments.  There is a small hole in either end and they can be had in different convenient lengths from Carini. They may even look a bit more elegant than some straps.


Do you think this suggests then that there may be movement in the soundboard after all (the much disparaged idea and name discussed vigorously on here previously) as its seems evident that the metronome example happens only when the board they are on is allowed to move All the Best mory
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Metal strap between reedblocks...?
« Reply #52 on: March 15, 2012, 05:28:48 PM »

It's fairly evident that the fondo does move, as it isn't infinitely stiff. The point is that it isn't desirable for it to move, unlike in a stringed instrument.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Metal strap between reedblocks...?
« Reply #53 on: March 15, 2012, 05:32:45 PM »

...and that's further evidence, as if it were needed, that movement in the soundbasefonpalletableboardo is a Bad Thing...
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Metal strap between reedblocks...?
« Reply #54 on: March 15, 2012, 05:49:48 PM »

...and that's further evidence, as if it were needed, that movement in the soundbasefonpalletableboardo is a Bad Thing...

Evidence?  What was the evidence please, unless I've missed something the only evidence we have from instruments is that fitting a brace across the reedblocks can improve the tremolo sound.   Everything else is just been throwing around ideas, good ideas mind, but not actual evidence m'lud.

Re the flexibility of the fondo, Van der Aaa boxes have a very thin and flexible one and the generally sound great.  Not sure what that means, but I'll throw it into the discussion.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Metal strap between reedblocks...?
« Reply #55 on: March 15, 2012, 06:06:28 PM »

Inelegant?

It is simple,
It works.

From an engineering point of view I call that elegant.
[/quote]

Theo, don't get me wrong as a fix for an obvious problem I think it is neat, simple and probably difficult to better but I was referring to it fitted as standard.
To me it is like seeing a buttress added to a building, no matter how well it has been executed in engineering terms it just tells you that the building has a problem.
Logged
aka malodeon

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Metal strap between reedblocks...?
« Reply #56 on: March 15, 2012, 06:15:54 PM »


Evidence?  What was the evidence please, unless I've missed something the only evidence we have from instruments is that fitting a brace across the reedblocks can improve the tremolo sound.   Everything else is just been throwing around ideas, good ideas mind, but not actual evidence m'lud.


Is it not generally accepted that the problem remedied by the strap is a result of resonance?.
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Metal strap between reedblocks...?
« Reply #57 on: March 15, 2012, 06:20:27 PM »

To me it is like seeing a buttress added to a building, no matter how well it has been executed in engineering terms it just tells you that the building has a problem.
Yes, but in the case of the metal link, it is inside the accordion, and it is not there because of a "problem"! It's there to alleviate the effects of a law of physics...
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Metal strap between reedblocks...?
« Reply #58 on: March 15, 2012, 06:39:02 PM »

It's fairly evident that the fondo does move, as it isn't infinitely stiff. The point is that it isn't desirable for it to move, unlike in a stringed instrument.
...and that's further evidence, as if it were needed, that movement in the soundbasefonpalletableboardo is a Bad Thing...

mmmmmmm  wasn't sure if this was passive aggressive at first still not sure :-\ but the vibrations are certainly evident maybe a brace is called for
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Metal strap between reedblocks...?
« Reply #59 on: March 15, 2012, 07:24:15 PM »

Mory, don't worry, I wasn't being passive-aggressive (:)

Theo, don't get me wrong as a fix for an obvious problem I think it is neat, simple and probably difficult to better but I was referring to it fitted as standard.
To me it is like seeing a buttress added to a building, no matter how well it has been executed in engineering terms it just tells you that the building has a problem.

A buttress is not a sign that the building has a problem! The flying buttresses of gothic cathedrals are fantastic and elegant pieces of design. They allow the outer wall of a cathedral to be enormously tall, support a heavy stone vaulted roof and still be mostly made of glass. Without them the walls would need to be very thick and would likely collapse under their own weight.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: 1 2 [3] 4 5   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal