Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4   Go Down

Author Topic: Plywood v's solid wood for contruction?  (Read 21228 times)

0 Members and 1 Guest are viewing this topic.

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Plywood v's solid wood for contruction?
« on: September 17, 2011, 02:56:24 PM »

Following on from the '21st Century Box' thread:
Someone mentions that Oakwood used to 'slot in plywood' to make their cabinets, and I think I've read that Loffet uses plywood too on some of his instruments.
In that case, who uses solid wood for their instrument manufacture?
( have I dreamt it, or isn't that what Castagnari use?)

I assume a ply box is lighter than a solid wood equivalent, apart are there any pro's and con's to  either form of contruction?
i.e sound vary between the two forms?
Just curious as ever!
cheers
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Plywood v's solid wood for contruction?
« Reply #1 on: September 17, 2011, 05:04:08 PM »

Oakwood used ply in other instruments too, notably the range of hammered dulcimers. The choice was always to do with stability and tonal characteristics ( in dulcimers of course, I don't think choice of timber in a box is anything like as critical) and never the cost of materials. My Primo box is largely made of veneered birch ply and I think it looks and sounds good. Martyn always used ply on the dulcimer tops because solid timber gave too much sustain!

I'm all in favour of using top quality tone-woods to make the parts of instruments where it makes a significant difference, the sound board and neck of a guitar for example. Others will say that the back and sides are vital too but I'm very happy with my Ovation Balladeer ta very much.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Plywood v's solid wood for contruction?
« Reply #2 on: September 17, 2011, 05:09:18 PM »

Plywood has two main advantages over solid wood.  

Because of it's construction (thin sheets glued alternatively at 90o it is stronger than most solid wood (on a weight for weight basis) and less prone to splitting or warping.  It is also a consistent product (so long as you buy good quality ply) and comes in consistent sizes, both of thickness and sheet size.  From a manufacturing point of view this saves a lot of time and wastage,  typically most hardwood products waste about a third of the wood in getting it to the finished dimensions.

Steve
Logged

Bob Ellis

  • Hero?....Where's my medal, then?
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2878
  • Ain't I cute?
Re: Plywood v's solid wood for contruction?
« Reply #3 on: September 18, 2011, 08:45:12 PM »

On the melodeon-making course led by Emmanuel Pariselle last July, we used solid wood (cherry) for most of the construction but plywood for the sound boards and for the grilles. Although I would not claim any expert knowledge, I believe that this was because of the greater rigidity for a given thickness of wood that ply gives over solid wood.

Marine quality birch ply is the best to use because of its quality and torsional rigidity. Ply from a DIY superstore should be avoided due to its inferior quality and the tendency of the edges to fray when you cut it.
Logged
Bob in beautiful Wensleydale, Les Panards Dansants, Crook Morris and the Loose Knit Band.
Clément Guais 3-row D/G/acc.; Castagnari 1914 D/G; Karntnerland Steirische 3-row G/C/F; Ellis Pariselle 2.6-row D/G/acc.; Gabbanelli Compact 2-row D/G with lots of bling, pre-war Hohner Bb/F; Acadian one-row in D.

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Plywood v's solid wood for contruction?
« Reply #4 on: September 18, 2011, 10:58:09 PM »

On the melodeon-making course led by Emmanuel Pariselle last July, we used solid wood (cherry) for most of the construction but plywood for the sound boards and for the grilles. Although I would not claim any expert knowledge, I believe that this was because of the greater rigidity for a given thickness of wood that ply gives over solid wood.

Marine quality birch ply is the best to use because of its quality and torsional rigidity. Ply from a DIY superstore should be avoided due to its inferior quality and the tendency of the edges to fray when you cut it.


Make sure that it is birch ply.  In more general usage "marine ply" is mahogany faced and the innards are anything and usually full of knots and voids.  It's main use is as dunnage, covering pallets of whatever for protection during sea voyages.  In most UK woodyards if you ask for marine ply that is what you'll get and it's cheap but worse than useless.

Ply will always fray on the edges IF you cut it with the wrong grade of saw and across the grain (as will natural wood).  The way to avoid this is to use the finest blade you can (fretsaw blades come in at least 15 different sizes and that's not allowing for the specials such as the ones with reversed lower teeth) and to use a waster on the back to support the baord and to stop the splintering.  I tend to use hardboard as I'm usually cutting multiple boards and at 3mm it's thick enough to hold a nail.

Steve
Logged

Bob Ellis

  • Hero?....Where's my medal, then?
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2878
  • Ain't I cute?
Re: Plywood v's solid wood for contruction?
« Reply #5 on: September 19, 2011, 12:14:36 AM »

I agree that the ply must be birch, as I said in my previous post, but there are also some poor quality birch plys out there. One DIY superstore in particular tried to palm me off with some awful stuff. That was whyy I suggested that the ply should be marine quality birch.

When cutting wood, whether ply or otherwise, I prefer to use a table saw, which combines speed and accuracy, the fence ensuring that the sides are parallel. A table saw gives less choice about the fineness of the blade, but with good quality birch ply you will still get a clean cut (even on those cuts that need to be across the grain), which you are less likely to achieve with inferior grades.
Logged
Bob in beautiful Wensleydale, Les Panards Dansants, Crook Morris and the Loose Knit Band.
Clément Guais 3-row D/G/acc.; Castagnari 1914 D/G; Karntnerland Steirische 3-row G/C/F; Ellis Pariselle 2.6-row D/G/acc.; Gabbanelli Compact 2-row D/G with lots of bling, pre-war Hohner Bb/F; Acadian one-row in D.

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Plywood v's solid wood for contruction?
« Reply #6 on: September 19, 2011, 08:34:49 AM »

There are various different grading systems for plywood depending on the country of origin.  The main common factor is sadly that you won't be able to buy the best grades anywhere other than a specialist supplier and in large sheets, and certainly not in a DIY shed.   The best you might get locally if you have a very good timber merchant is B/BB grade Finnish birch ply, which is excellent quality and will sand to a beautiful finish.

Plywood graded GL1 (Germanischer-Lloyd, a German classification society, their answer to Lloyds of London) is top quality stuff that is used for aircraft construction among other things.  It can be bought mail order from aircraft timber suppliersr.

Cross cutting ply cleanly is tricky. If you can ask someone with a panel saw that has a seperate scoring blade to cross cut to the size you want then you will get the cleanest cut by far.  A Melamine/Fine cut off type blade in a sliding mitre or radial arm saw does a pretty good job but are expensive.  Taping along the cut line on the rear of the wood can help, as does using a backing sheet if you can sandwich them reasonable firmly somehow.

Top quality ply can look beautiful if it's nicely finished, and takes stains and dyes well.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Plywood v's solid wood for contruction?
« Reply #7 on: September 19, 2011, 11:14:03 AM »

I always use GL1 in the construction of my melodeons.
They are mostly solid wood but I use GL1 for sound-boards and stop sliders (registers).
It is consistently reliable and a pleasure to work with. Not cheap though (something like £30 for a 1200 x 1200mm sheet).
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Bob Ellis

  • Hero?....Where's my medal, then?
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2878
  • Ain't I cute?
Re: Plywood v's solid wood for contruction?
« Reply #8 on: September 19, 2011, 12:39:49 PM »

I have used GL1 in another context and would echo Rees's comments about its reliability and ease of use. It is possible to get smaller sheets from model aircraft and boat suppliers. Some of them will also machine it to precise specifications, if asked.
Logged
Bob in beautiful Wensleydale, Les Panards Dansants, Crook Morris and the Loose Knit Band.
Clément Guais 3-row D/G/acc.; Castagnari 1914 D/G; Karntnerland Steirische 3-row G/C/F; Ellis Pariselle 2.6-row D/G/acc.; Gabbanelli Compact 2-row D/G with lots of bling, pre-war Hohner Bb/F; Acadian one-row in D.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Plywood v's solid wood for contruction?
« Reply #9 on: September 24, 2011, 09:01:19 AM »

Here's a recent pic from the Facebook of 'well respected' Norwegian maker Olav Bergflodt. 

He's definitely using some form of laminate, though it isn't a plywood I'd recognise.

http://www.youtube.com/watch?v=6qAaNlVZHnw&feature=share

Simon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
  • Serenellini Selli C/F and Gold98 G/C
Re: Plywood v's solid wood for contruction?
« Reply #10 on: September 24, 2011, 09:02:04 AM »

In more general usage "marine ply" is mahogany faced and the innards are anything and usually full of knots and voids.
If you build a plywood boat you have to use 'marine plywood' because it doesn't have voids. If you want a lightweight solution you could try the plywood they use for model aircrafts. Aircraft plywood is made of very thin layers and is much stronger than ordinary plywood of the same thickness (so you can use thinner plywood).
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Plywood v's solid wood for contruction?
« Reply #11 on: September 24, 2011, 09:45:40 AM »

Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Plywood v's solid wood for contruction?
« Reply #12 on: September 24, 2011, 01:20:38 PM »

Thanks for that link - fascinating!
I'm aware of the structural properties of ply, as my raised wooden ended concertina is an Ebony ply, thereby alowing the 3D nature to be explored.
I suppose my original thought about ply v's solid was on things like overall sounds given off from the box, as solid maybe denser so sound might travel through better?
.... but that's only a random thought.
Is there any difference in sound quality?
It seems to be Tallships who has touched on the sound characterisics more than the physical nature as applied to manufacture.
( Bob, not sure where or what the 'sound board' is..... as yet I haven't delved too deeply inside )
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Plywood v's solid wood for contruction?
« Reply #13 on: September 24, 2011, 01:28:39 PM »

not sure where or what the 'sound board' is.

I think it's a popular misnomer for the big board with the holes in it. The palettes cover the holes on the outside, and the reeds/reedblocks are on the inside.

It's a misnomer because it does not contribute substantially to the sound of the instrument, unlike the large flat panel making up the front of any stringed instrument, for example.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Plywood v's solid wood for contruction?
« Reply #14 on: September 24, 2011, 01:36:30 PM »

Beat me to it Anahata! Is this what Theo and others sometimes refer to as the 'Fondo'?
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Plywood v's solid wood for contruction?
« Reply #15 on: September 24, 2011, 01:54:09 PM »

Fondo is what the Italian makers call it. The French say La Table. Here in Wales it's Y Bwrdd.
So, what is it in Hinglish, please?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Plywood v's solid wood for contruction?
« Reply #16 on: September 24, 2011, 03:28:22 PM »

So, what is it in Hinglish, please?

Apparently it's called  'The Big Board With The Holes In'  >:E
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Plywood v's solid wood for contruction?
« Reply #17 on: September 24, 2011, 04:04:54 PM »

As anyone who's read my signature might guess, we've touched on my pet hate here.

The term "soundboard" for that part of an accordion is a definite misnomer but the recent trend for referring to it as the "fondo" in an attempt to be correct is worse in my opinion. I don't see how a word that has no meaning at all in the language of the discussion is a better alternative. In Italian it's a perfectly sensible descriptive word but in English it's adding a layer of unnecessary jargon that also smacks of pretentiousness. My own preferred term is baseboard and I've heard others call it a faceplate or endplate, all of which are much better descriptions and provide a greater degree of clarity in the context of an English language discussion than "fondo".

Roger Bucknall wrote in a piece on the similar subject of guitar makers calling themselves "luthiers" that he's been stopped for speeding in both the UK and US; both times by a policeman, not a Gendarme.  ;D
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Plywood v's solid wood for contruction?
« Reply #18 on: September 24, 2011, 04:55:32 PM »

I disagree. A word which has no meaning whatsoever is surely best placed to mean something for which we have no word? Baseboard is confusing because of the homophone with bassboard. Endplate could easily refer to the board which your left hand rests against. Faceplate could well mean a wooden grille. I don't think that those terms give any more clarity than fondo, in fact I think that soundboard, however technically inaccurate is a much clearer word for those unused to the jargon. I think that fondo is easily the most unambiguous of the lot.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Plywood v's solid wood for contruction?
« Reply #19 on: September 24, 2011, 05:08:02 PM »

I think that fondo is easily the most unambiguous of the lot.

And will join the numerous loanwords that enrich the English language.   Music is particularly rich in imports from Italian.  Just a few examples: forte, piano, mezzo, soprano, andante, legato, allegro, bravura, cantabile... I could go on ad nauseum.

there are dozens of them just in music.  So 'fondo' if it becomes accepted into English will be following a well established tradition.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1] 2 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal