Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 [4]   Go Down

Author Topic: Plywood v's solid wood for contruction?  (Read 21213 times)

0 Members and 1 Guest are viewing this topic.

jb

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 250
Re: Plywood v's solid wood for contruction?
« Reply #60 on: September 28, 2011, 05:03:16 PM »

If this daft discussion goes on much longer I'll be forced to repeat my earlier suggestion of bulkhead, which I thought was actually quite a good one.
Logged
there ain't no such thing as a free reed

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Plywood v's solid wood for contruction?
« Reply #61 on: September 28, 2011, 07:00:14 PM »

If this daft discussion goes on much longer I'll be forced to repeat my earlier suggestion of bulkhead, which I thought was actually quite a good one.

I thought of that too. I hadn't spotted your earlier posting. Gets my vote.  :|glug
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Plywood v's solid wood for contruction?
« Reply #62 on: September 28, 2011, 08:07:32 PM »

Ermm.....
( stands up and takes a Big breath......)
I hereby apologies for asking what a soundboard was 4 pages back.
....... innocence can be a curse you know  :|bl

The whole reason for asking about whether there was any difference between ply and solid wood was I'd heard Loffet 'used ply' and I quite like what I squeezed in the summer made by Loffet, and so did wonder if it made any difference to the sound or response.
That's all.
I'm glad it's proving to be such a wonderfully meandering thread.

Ok.... carry on.
'Bulkhead' was the latest if I remember........  ;D
cheers
Q

Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Plywood v's solid wood for contruction?
« Reply #63 on: September 28, 2011, 08:35:28 PM »


The whole reason for asking about whether there was any difference between ply and solid wood was I'd heard Loffet 'used ply' and I quite like what I squeezed in the summer made by Loffet, and so did wonder if it made any difference to the sound or response.
That's all.
Q

I'm hoping the polls will get us back the initial discussion which I consider more interesting and necessary for myself. I'm trying to build an instrument and need the information. Thanks for starting the thread too. It's been interesting all the way round.

Though "bulkhead" makes me think of ships and water.  :P

Ed
« Last Edit: September 28, 2011, 08:37:18 PM by Telemorris »
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Plywood v's solid wood for contruction?
« Reply #64 on: September 28, 2011, 09:01:35 PM »

I understand that the Hohner "Arthurian" line uses plywood rather than solid wood, & this is taken to be an indication of inferior - or at least cheaper build quality.  But yes, IS (quality) plywood really a inferior product?

Having recently put new hardwood flooring in my house, I noticed there are a range of products other than solid wood now available - what they call "engineered wood" with both real wood & "fake" wood veneers. These can be more expensive than solid wood & are (supposedly) used partly for their greater stability & resistance to moisture. I could see the same thing being true of accordions...
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Plywood v's solid wood for contruction?
« Reply #65 on: September 28, 2011, 10:13:00 PM »

Airtime: yes, I can see many benefits of a ply, as you say, stability etc. being a sound reason for choice in something like a melodeon.

Telemorris: it has been a somewhat unexpected journey, I confess......but quite fun!
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Plywood v's solid wood for contruction?
« Reply #66 on: September 29, 2011, 05:36:13 PM »

Do any builders still use solid wood for the ...( I'm afraid to call it anything)?  I've wondered myself if there is a tonal difference, and have been tempted to try it.  There are so many problems associated with solid wood that are fixed by using plywood for the ......  Additionally, the sound with plywood is well proven to be good, it's really hard to justify the solid wood unless there was a really big improvement in sound.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Plywood v's solid wood for contruction?
« Reply #67 on: September 29, 2011, 06:47:45 PM »

It seems that the preferred materials for the board (translation from the Welsh) with most current manufacturers is ply or aluminium.  Just thinking about the geometry and function of all the parts suggest that the difference in tone between materials is most likely to be the absobtion/damping of harmonics in the vibration of the reed.  Certainly the aluminium board in my posh box gives a sharper tone (cuts into your ear like a chisel!) than another box from the same maker with a ply board.  The transmission path is so short and wide from the reed to the outside air that I'm not convinced that the wood has as much effect on the tone - I could be wrong, of course.  It would be interesting to compare if anyone made a board from an even more accoustically neutral composite, concrete perhaps?  Presumably the Holy Grail for an experimenter would be a material so rigid and non-resonant it doesn't have any sympathetic vibration causing loss of enegy at the reed.


Sound deadening materials for engine compartments use a composite of varying density rubbers sandwiching a lead foil layer.  How about an ali/lead/ali sandwich?

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Plywood v's solid wood for contruction?
« Reply #68 on: September 29, 2011, 07:43:26 PM »

Castagnari used a solid soundboard/baseboard/fono/table made of western red cedar in their Casta model.   They certainly have a glorious tone.   

The model was only produced for a short time, and I suspect it was dropped because of mehanical problems with the cedar soundboard/baseboard/fono/table.  I have seen one three voice example where the soundboard/baseboard/fono/table bulged so much under normal playing pressure that pallets leaked to the extent that several notes played all the time on the push.  I can imagine that there could also be problems with fracturing along the grain between the vent holes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Plywood v's solid wood for contruction?
« Reply #69 on: September 29, 2011, 09:43:45 PM »

Castagnari used a solid soundboard/baseboard/fono/table made of western red cedar in their Casta model.   They certainly have a glorious tone.   

Theo, how thick was that cedar palletboard? And what was the grain orientation - grain running parallel to the long or the short dimension of the box?

Thanks
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Plywood v's solid wood for contruction?
« Reply #70 on: September 29, 2011, 10:36:52 PM »

Grain is parallel to the long side of the box, and thickness 4.2mm  - fortunately I have one in the workshop now. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Plywood v's solid wood for contruction?
« Reply #71 on: September 29, 2011, 11:13:17 PM »

I have seen one three voice example where the soundboard/baseboard/fono/table

Lol! It's not often that I see a professional so vexed by the question of the naming of parts that they offer a proliferation!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Plywood v's solid wood for contruction?
« Reply #72 on: September 29, 2011, 11:20:57 PM »

I have seen one three voice example where the soundboard/baseboard/fono/table

Lol! It's not often that I see a professional so vexed by the question of the naming of parts that they offer a proliferation!

Well I'm now hyper sensitised in case I come across as pretentious!  And I see there is a typo in my PC-ness, arrgh.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Plywood v's solid wood for contruction?
« Reply #73 on: September 29, 2011, 11:31:48 PM »

I see there is a typo in my PC-ness, arrgh.

Yes but 'phono' will only be recognised by old hi-fi buffs.  ;)
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)
Pages: 1 2 3 [4]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal