Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Quietening Hohner Pokerwork action.  (Read 9739 times)

0 Members and 1 Guest are viewing this topic.

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Quietening Hohner Pokerwork action.
« Reply #20 on: May 08, 2012, 03:46:30 PM »

Just to clarify, is this the right thickness to use to quiet the bass & treble buttons of Pokerworks?

http://www.cgmmusical.co.uk/CGM_Musical_Services/Felt_Leather_Pallets.html#3
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Quietening Hohner Pokerwork action.
« Reply #21 on: May 08, 2012, 03:49:43 PM »

I used it on all of my old boxes and it works fine! Sometimes it comes with red felt.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Quietening Hohner Pokerwork action.
« Reply #22 on: May 09, 2012, 12:34:38 AM »

Just to clarify, is this the right thickness to use to quiet the bass & treble buttons of Pokerworks?

http://www.cgmmusical.co.uk/CGM_Musical_Services/Felt_Leather_Pallets.html#3
Yes, that's the stuff, but remember this is for pallet facing renewal, not for a felt/leather buffer under the key lever arms.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Quietening Hohner Pokerwork action.
« Reply #23 on: May 30, 2012, 03:01:30 AM »

I have the felt/leather from Charlie Marshall. Couple of questions:

I take it it's a good idea to remove the existing palette facing before adding the new stuff?

What glue do people use to reattach the palettes to the rods?

Thanks!
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Quietening Hohner Pokerwork action.
« Reply #24 on: May 30, 2012, 04:23:21 AM »

I take it it's a good idea to remove the existing palette facing before adding the new stuff?

Yep! I slide a blade in between the leather and the wood of the pallet which will remove the bulk of the leather and finish off using a sheet of 80 grit wet-n-dry on a flat board to remove ny remaining. I then use Copydex to attach the new facing, others use PVA.

Quote
What glue do people use to reattach the palettes to the rods?

I use a hot glue gun as it is a good fix and is removable if needed, others have reported using PVA and even reed wax.

Spikey

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 160
  • NZ
Re: Quietening Hohner Pokerwork action.
« Reply #25 on: May 30, 2012, 05:01:35 AM »

We found that soaking the pallets in a shallow dish of methylated spirits (as suggested somewhere here - sorry, can't find where now) for a few minutes worked really well for removing the old facings - they peeled off easily, taking most of the old glue with them.

And planning to use a hot glue gun, as Lester says, to re-attach the pallets to the levers - I think another benefit of this is that it is slightly flexible so that it allows adjustment of the pallets so that they sit flat over the holes through to the reed blocks (I'm sure there's a technical term for this bit of the melodeon...) if they are not positioned perfectly on the levers when you re-attach them, which sounded very reassuring for a novice.
Logged

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Quietening Hohner Pokerwork action.
« Reply #26 on: May 30, 2012, 10:02:29 AM »

I think that was me who put up the original post.

If you do use methylated spirit make sure you don't leave the pallet facing to soak, 10 seconds is plenty otherwise the pallet will 'dish'. I would only use this method if the facings are really difficult to remove, otherwise as Lester says, peel off the facings and remove what's left with coarse abrasive paper on a flat board.

Personally I would never use hot glue for attaching pallets, It's a right pain if you ever want to remove them. Far better (in my opinion) to use a 6mm dot of linen cut out with a leather punch and glued on with pva. These can then be easily adjusted or removed but will last for years...many 1930s Hohners still have the originals.

Martyn
 
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Quietening Hohner Pokerwork action.
« Reply #27 on: May 30, 2012, 10:27:34 AM »

Martyn,
Have to disagree about the difficulty of removing hot glue fixed pallets.  The stuff always peels of cleanly when I've had to remove it.  I only place the glue as a pat over the pallet with the arm already in place. If you place the hot glue and then press the arm into it then I agree about the difficulty, but that applies to any glue placed into the groove below the arm.
If there is a difficulty with hot melt it is in learning to apply it cleanly, but that is something that comes quickly with a bit of practice.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Quietening Hohner Pokerwork action.
« Reply #28 on: May 30, 2012, 12:01:34 PM »

If there is a difficulty with hot melt it is in learning to apply it cleanly, but that is something that comes quickly with a bit of practice.

Yes.  You can end up with a melodeon full of 'cat whiskers'.
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Quietening Hohner Pokerwork action.
« Reply #29 on: May 30, 2012, 05:19:36 PM »

Personally I would never use hot glue for attaching pallets, It's a right pain if you ever want to remove them. Far better (in my opinion) to use a 6mm dot of linen cut out with a leather punch and glued on with pva. These can then be easily adjusted or removed but will last for years...many 1930s Hohners still have the originals.

Au contraire, a hot glue gun works very well, as Theo and others pointed out. I have updated pallets of half a dozen instruments already without any problem.

As for the original "discs" I believed they were glued with animal hide glue, and one has to be careful when removing them as sometimes bits of the pallet will follow!
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Quietening Hohner Pokerwork action.
« Reply #30 on: May 30, 2012, 05:28:33 PM »

I use an aliphatic resin glue (also, I believe, sometimes known as "yellow glue", but I'm open to correction); it holds really firmly but it's easy to break the bond between the glue and the metal of the arm to remove the pallet. The wood then cleans up very quickly with a small sharp (and I mean SHARP) chisel and non-clog abrasive.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Quietening Hohner Pokerwork action.
« Reply #31 on: June 09, 2012, 07:00:05 AM »

I rebuilt the keyboard of one with pallet assemblies from Weltmeister, the thing was REALLY quiet. The pallets have rubber wrists that slide on the old arms ,with aluminium pallets faced with felt and leather. Worked great on a old Hohner Carmen too. made it nearly as quiet as a new Borsini I have in the shop.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Quietening Hohner Pokerwork action.
« Reply #32 on: June 09, 2012, 07:15:22 AM »

My vintage Hohner 12 bass has little screws holding the palettes on, with a bit of glue. They are unscrewing pretty easily. I'll add a dab of white carpenter's glue when I screw them back on.
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Quietening Hohner Pokerwork action.
« Reply #33 on: June 10, 2012, 06:08:39 AM »

Leave the screws slightly loose when you glue the pallets back on. If you snug down the screws it will cause the pallet to try to lign up with the flat bit on the end of the arm, odds are that the flat on the arm is not perfectly parallel with the deck. White glue/PVA will hold the arm around the screw ,and allow the pallet just enough flex to deal with things.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Quietening Hohner Pokerwork action.
« Reply #34 on: June 10, 2012, 07:11:54 AM »

I have the impression that a dab of glue is just to prevent the screw from unscrewing rather than to attach the arm to the palette.
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Quietening Hohner Pokerwork action.
« Reply #35 on: June 10, 2012, 07:54:59 PM »

 The glue does a couple of things, It keeps the pallet from rotating, and it "fixes" the pallet from tilting.
I found if I put a flexible joint on the triangular bass valves that the pallet appeared to be able to tilt under bellows compression ,and allow leaks. It appears that it is important that the pallet be held firmly flat.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Quietening Hohner Pokerwork action.
« Reply #36 on: June 12, 2012, 05:37:37 PM »

I just completed the work on the basses of my BbEb vintage Hohner. Actually a bit of a tricky job getting the tiny screws back into their tiny holes with the palette arms in the way. And yes, the glue is essential for holding the palettes in position - the tiny screws not being at all sufficient. 

I would say that 80% of the noise is gone now, even without tackling the treble palettes. I have a feeling my Pokerworks have a little more treble palette noise than the old Hohner though.
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Quietening Hohner Pokerwork action.
« Reply #37 on: June 13, 2012, 07:50:32 AM »

Those tiny screws are fun, I use a bit of reed wax on the tip of the driver to hold them on, it makes it a lot easier to maneuver.
Kimric
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal