Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Reed suppliers  (Read 21464 times)

0 Members and 1 Guest are viewing this topic.

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Re: Reed suppliers
« Reply #40 on: February 25, 2012, 01:31:15 PM »


Good point. I am actually testing on an old pokerwork. Pulling it apart and stuff to test/learn,

I thoroughly recommend not only pulling it apart, but then completely rebuilding it to the highest standard you can, including replacing all the reed valves, re-waxing, and tuning.  You will learn a huge amount, and it will cost you very little in £££.

I thought it would be a good idea after seeing Charlie Marshall's mass supply of Hohner bits. Because I will learn a lot about it all and also get a better melodeon out of it. Also, got one in G/C (I already owned a D/G) so it would be even more worth while so I have a different box.
It is currently in bits in a workshop in Aldershot, being looked at and measured by the engineer so he can make a sound board etc for me to experiment with.

I am taking parts of the Hohner off/out of the melodeon and putting it in a new shell etc to test. Meaning that I can test button mechanisms, reedblocks, body etc but I can reverse it all at the end if it doesn't work. Rather than buying single components and then failing with my experiment only to have bits and no melodeon.

I also had a look inside my Saltarelle, to compare. There was unsurprisingly a big difference in quality

**DTN**

  • Derek The Nutter
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 472
  • Derek The Nutter
Re: Reed suppliers
« Reply #41 on: February 25, 2012, 02:10:12 PM »

Thank you for the help everyone.

I will practice at tuning reeds before I purchase any. I will still look for reed sets that are supplied 'in tune' to save myself time. But if I can't do that I will be prepared to tune them from whatever they are supplied in from the manufacturer.

I've still got a couple of old accordion blocks you can have ..  i once used another of these blocks just to retune it into a melodeon type block ... just to get use to the effect of tuning and lost nothing by wrecking them .... i did get it to experiment in making a badly sounding one row block  >:E without breaking the reeds... it worked ..then i threw it away .. cost nothing!
Logged
All the gear and no idea! .... DTN   "Hampshire UK"

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Re: Reed suppliers
« Reply #42 on: February 25, 2012, 02:17:44 PM »

Thank you for the help everyone.

I will practice at tuning reeds before I purchase any. I will still look for reed sets that are supplied 'in tune' to save myself time. But if I can't do that I will be prepared to tune them from whatever they are supplied in from the manufacturer.

I've still got a couple of old accordion blocks you can have ..  i once used another of these blocks just to retune it into a melodeon type block ... just to get use to the effect of tuning and lost nothing by wrecking them .... i did get it to experiment in making a badly sounding one row block  >:E without breaking the reeds... it worked ..then i threw it away .. cost nothing!


Cheers Derek. Just sent you a text about it :)

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Reed suppliers
« Reply #43 on: February 25, 2012, 04:24:29 PM »

Mattsmee, you are getting a lot of very wise and sound advise based on true experience.  I do not doubt what you say, but I'm having trouble imagining how an engineer (what kind?) can help much in making a smooth playing good sounding accordion.  I would put Theo or Lester's gut instincts over any engineer's theory any day.  Building an accordion is challenging but not terribly hard, but building a good one is,  and I feel will take much more than you may imagine.  I can't remember how many time I said "hmm, didn't see that coming", and after finishing 12 I've just about scratched the rest of my hair off my head at the same time as getting more confident.

FRM takes several long vacations, and email is not his main source of communication.  It's better to call.  Frank Romano is very good to deal with.  He's not cheap, but he'll take care of you.  But as was suggested, if you're buying several sets, you may get better prices direct from the maker.  I buy from wholesalers because I would rather the extra cost to avoid dealing with the hassles of buying from Italian makers.  And as Theo said, he does not tune reeds, he sells reeds in known pitches, and from my experience, reeds from the makers that he stocks will be very close in pitch, but there is absolutely no getting out of final tuning, and to do it right it takes time and patience, even after you taken the time to learn how, and that almost always means messing up a few.

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Re: Reed suppliers
« Reply #44 on: February 25, 2012, 04:47:37 PM »

Mattsmee, you are getting a lot of very wise and sound advise based on true experience.  I do not doubt what you say, but I'm having trouble imagining how an engineer (what kind?) can help much in making a smooth playing good sounding accordion.  I would put Theo or Lester's gut instincts over any engineer's theory any day.  Building an accordion is challenging but not terribly hard, but building a good one is,  and I feel will take much more than you may imagine.  I can't remember how many time I said "hmm, didn't see that coming", and after finishing 12 I've just about scratched the rest of my hair off my head at the same time as getting more confident.
I appreciate experience over everything else, it is very important. But it isn't crucial. I feel I have to defend myself by saying that I am not coming at this project from a completely ignorant angle. The engineer is simply helping me with construction as he has no musical knowledge. He is cutting, making and sourcing materials. I have been thinking and looking into this for 2 years and only now do I feel I can get physically working on it.
Only time will tell if I can pull this off, but I don't to think that my lack of experience will mean I won't create a decent instrument. No point damning it before I event start playing about with the Hohner. I know it is going to take time, and 2 years planning kind of shows that I have not rushed into this. I have already come into difficulties with what I can build, and that has come up just by researching and planning. I am not going to start building anything until I am entirely confident it will work. I do not have the money to spend on tests that will fail.

I know I come across as someone who thinks he knows it all, I don't know everything. But I know more than the average person. Comes from constant research and study.

FRM takes several long vacations, and email is not his main source of communication.  It's better to call.  Frank Romano is very good to deal with.  He's not cheap, but he'll take care of you.  But as was suggested, if you're buying several sets, you may get better prices direct from the maker.
Didn't realise they took long vacations, I know some companies take Xmas Holidays up until end of January. I can't really call them due to it being an international call. Just going to wait or not bother with them. I am unable to be on the end of a phone all the time due to work etc.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Reed suppliers
« Reply #45 on: February 25, 2012, 04:52:44 PM »

Good luck with the project. Hope you keep us up on how it's going.  I think the most important quality to begin building an accordion is a very very strong desire to do it, then the strong desire to improve on the first one.  The more folks tried to tell me it was too hard the more determined I was to prove them wrong.

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Re: Reed suppliers
« Reply #46 on: February 25, 2012, 04:57:01 PM »

The more folks tried to tell me it was too hard the more determined I was to prove them wrong.

That is how I feel now :P

I think the most important quality to begin building an accordion is a very very strong desire to do it, then the strong desire to improve on the first one.

Yeah, the bastardisation of the Hohner Pokerwork will be a very good "first one". Then I can get into making mechanisms etc. Step by step will get there eventually. Have been taking photos as I go already. Including the cardboard mock melodeon  :||:

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Reed suppliers
« Reply #47 on: February 25, 2012, 05:46:20 PM »

I've followed this thread with interest, but there's one aspect I feel people are being very coy about; we get advice such as "it will be cheaper from the makers", but no-one ever says what constitutes "cheap".  I'm sure I'm not alone in wondering what's a reasonable ball-park figure for a set of reeds from a manufacturer - let's say for argument's sake TAM reeds for a 23-button 8-bass D/G - and what sort of lead-time would one be looking at?  Makers put all kinds of info on their sites, but NEVER prices.......

Graham


Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Re: Reed suppliers
« Reply #48 on: February 25, 2012, 05:49:39 PM »

I've followed this thread with interest, but there's one aspect I feel people are being very coy about; we get advice such as "it will be cheaper from the makers", but no-one ever says what constitutes "cheap".  I'm sure I'm not alone in wondering what's a reasonable ball-park figure for a set of reeds from a manufacturer - let's say for argument's sake TAM reeds for a 23-button 8-bass D/G - and what sort of lead-time would one be looking at?  Makers put all kinds of info on their sites, but NEVER prices.......

Graham

I can't answer that question myself as I haven't heard back from the manufacturers yet. However, I can tell you what Charlie Marshall emailed me a month ago on prices of the reeds he has:
"Prices for D/G (42) treble set 2 voice suitable for Hohner Pokerwork/Erica  £134.90    with bass reed set (62)  £198.95,  D/G bass/treble fitted on reed blocks (62) £225.95,  Cagnoni macchina D/G treble set (42) £112.90 with bass set (62 £168.85,  Cagnoni Tipo a Mano D/G treble set (42) £156.90  with bass set (62) £235.85 prices"

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Reed suppliers
« Reply #49 on: February 25, 2012, 06:34:09 PM »

I have an older price list from Frank Romano, in which he had the following note:

"N.B.  Our reeds are available with leathers and tuned at 440 or without leathers, raw tuned slightly higher (442)."

It may seem to imply the leathered reeds are 'ready to go', but I think it's a preliminary factory tuning in either case.  
The leathered reeds would need final tuning once installed.
The non-leathered ones would require valves (of your choice) and final tuning once valved and installed.

Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed suppliers
« Reply #50 on: February 25, 2012, 07:24:06 PM »

Just wanted to wish you luck, Matt.  I can't square the negative comments about the usefulness of an engineer in building what is, after all, a complex piece of machinery - look at the boxes Doug Briggs builds!  DTN gave me a Hohner 4-stop in A which needs some fine tuning if you're interested in trying your hand...

Rob.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed suppliers
« Reply #51 on: February 25, 2012, 07:34:34 PM »

Just wanted to wish you luck, Matt.  I can't square the negative comments about the usefulness of an engineer in building what is, after all, a complex piece of machinery - look at the boxes Doug Briggs builds!  DTN gave me a Hohner 4-stop in A which needs some fine tuning if you're interested in trying your hand...

Rob.

Don't think anyone is saying that being an engineer (i was one for 40 years) or having, what sounds like, a v useful degree are negative things. But we have all been through the actual practical part of building/refurbing/fixing boxes and have found however much theory you have there is art/black magic in making a good box that only doing it will provide.

I really hope that Matt succeeds in his endeavours but his questions do seem to indicate he is at the start of his journey.

Ps I would not recommend a 1row4stop as your first tuning experience as it is a really difficult box to get at the reeds on. My old tuner Nils Nielson downright refused to even look at my one row.
« Last Edit: February 25, 2012, 07:37:08 PM by Lester »
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Reed suppliers
« Reply #52 on: February 25, 2012, 07:35:17 PM »

I am an engineer and accordion builder. The two seem to fit nicely together.
I don't know much about materials, finishes, sound waves, acoustics, spreadsheets, metallurgy, etc.

A melodeon is just a simple machine and I do know a lot about machines.  (:)

Good luck with your project. My melodeon adventure began 35 years ago and I'm still enjoying the thrill of the ride.
It's a long and dusty road .........................
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Re: Reed suppliers
« Reply #53 on: February 25, 2012, 07:43:19 PM »

Just wanted to wish you luck, Matt.  I can't square the negative comments about the usefulness of an engineer in building what is, after all, a complex piece of machinery - look at the boxes Doug Briggs builds!  DTN gave me a Hohner 4-stop in A which needs some fine tuning if you're interested in trying your hand...
Rob.
Cheers Rob, that is very helpful. DTN is going to give me some old reed blocks to practice with, and when I have the confidence I will give you a bell and I would be happy to give it a go if you are willing to let me try.

Don't think anyone is saying that being an engineer (i was one for 40 years) or having, what sounds like, a v useful degree are negative things. But we have all been through the actual practical part of building/refurbing/fixing boxes and have found however much theory you have there is art/black magic in making a good box that only doing it will provide.

I really hope that Matt succeeds in his endeavours but his questions do seem to indicate he is at the start of his journey.
Thanks for the hope. However, I would like to say there is no point damning my project before I have even started. Or without knowing my abilities. As I said, two years of planning and two solid months of research has been put in before I have even started to build. I am not jumping in and hoping for the best. So I wouldn't be so quick to judge where I am on this journey or what I will achieve just yet.

I am an engineer and accordion builder. The two seem to fit nicely together.
I don't know much about materials, finishes, sound waves, acoustics, spreadsheets, metallurgy, etc.

A melodeon is just a simple machine and I do know a lot about machines.  (:)

Good luck with your project. My melodeon adventure began 35 years ago and I'm still enjoying the thrill of the ride.
It's a long and dusty road .........................
Thanks Rees. I am enjoying the research part the moment, so building will be even more fun as I love that sort of thing even more.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Reed suppliers
« Reply #54 on: February 26, 2012, 01:20:10 AM »


It's a long and dusty road .........................

Got lots of hills and bumps too, but lots of scenery and fun.

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Reed suppliers
« Reply #55 on: February 26, 2012, 03:48:45 AM »

FRM takes several long vacations, and email is not his main source of communication.  It's better to call.  Frank Romano is very good to deal with.  He's not cheap, but he'll take care of you.

Also, he is not a young man. Certainly well over normal retirement age. When I visited him a couple of years ago to buy a couple of things he told me that while he used to ship stuff all over the world, these days he wasn't quite so keen on doing business outside North America. But I would certainly give him a call. He is certainly very well connected in the industry. If you're having trouble getting in touch with him I'd be happy to make an exploratory call for you, living an hour away as I do.
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal