Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: A Hohner to Refurb and Learn From  (Read 9362 times)

0 Members and 1 Guest are viewing this topic.

chappie86

  • Folker
  • Good talker
  • **
  • Offline Offline
  • Posts: 65
  • Discovering Melodeons
A Hohner to Refurb and Learn From
« on: April 21, 2012, 12:21:23 PM »

Hi All,

I have just purchased my first Hohner to restore and learn from. I believe it is a pre-pokerwork that was aimed at the American market circa 1930's from the research I have done.

I have purchased the box as a challenge and also to teach me alot about melodeons, I am going to try and do as much as I can however, I feel a trip to one of the talented repairers from this forum will be required at certain points in the process. 

Can anybody shed any light on the history of this model and anything I should do to improve it?

All the best,

Chappie

Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A Hohner to Refurb and Learn From
« Reply #1 on: April 21, 2012, 12:56:30 PM »

The standard things to do would be:

  • Re-face the pallets with thicker felt/leather
  • Judging by the age a re-wax and new valves
  • Restrict the treble action
  • dependant on the state of the bellows (they look OK) retaping may be worthwhile
  • retune

That will teach you a whole bunch of things about melodeons

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: A Hohner to Refurb and Learn From
« Reply #2 on: April 21, 2012, 01:04:42 PM »

Without dredging up the question of model numbers - it is probably later than you guess, not a "pre" pokerwork but the same body "customised" with what was construed by some as a superior finish.
Might even have an extra voice shoe-horned into it, a few did, but it is difficult to tell from a photo.
Logged

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: A Hohner to Refurb and Learn From
« Reply #3 on: April 21, 2012, 07:06:56 PM »

I did it. There's nothing like playing aninstrument you've fettled youself!  :||:
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: A Hohner to Refurb and Learn From
« Reply #4 on: April 22, 2012, 04:34:08 AM »

At the risk of sounding like a troll (which isn't my intention), I strongly suggest learning how to tune on another accordion's reeds. Perhaps invest in a beater PA. I've purchased them on Ebay sometimes for just barely above the price of shipping (all in <$20). Learning to tune on your Hohner might completely destroy its lovely old set of alu H-plate reeds, a feat you could regret later. In the meantime you could learn the other aspects of a refurbishment like the things Lester mentioned which are less invasive and far more difficult to bungle. Felt padding, interior sanding and cleanup, bellows tape, gaskets, restricted action, bushes, etc. If you 'd like it to be playable, albeit out of its ideal tuning, you could even remove the reed plates (don't touch the tongues), remove all the old wax, and then replace them on the reed blocks with new wax and valves. Then reseat the reed blocks if needed. That way you'd get the hang of the whole process but will not destroy the reeds, which are sought after for their softer flutey quality -- remember if you do start tuning and you damage some of the reeds are beyond use (it can happen in a split second), you'll have to buy another accordion for its reeds when you could already have the one you just bought. It's only a suggestion, and of course if you feel up for the task you can try to undertake it. But I thought I'd lay that out first.  Good luck with whichever path! (:)  :||:

I'll edit this by saying that in my experience, errors made while learning to tune are a lot like errors made while boating. In the clamor to correct yourself, a cascade of other errors can follow in quick succession turning a small mistake into a small catastrophe. True story: I once dropped a keeper mackerel and another fisherman and myself both ducked down to pick it up at the same time. My cargo shorts caught on a folding bait table protruding from the transom, snapped it off, and in a rush to apologize, dropped said mackerel, thus engaging the assistance of a third fisherman who caused the second to slip and become injured. Whole thing took about nine seconds, when a lost mackerel wouldn't have mattered a tit considering how many were schooling and coming into the boat. Fortunately the injury wasn't something a few post-trip Red Stripes couldn't handle but you get the idea.  :D
« Last Edit: April 22, 2012, 04:41:31 AM by Christopher K. »
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: A Hohner to Refurb and Learn From
« Reply #5 on: April 22, 2012, 07:43:12 AM »

Wise words Christopher - I did exactly that, got a wrecked 1940s Ubaldi PA for £20 and practiced on that, made a mess of a few things too , I`ve yet to practice bellows taping on it and need to as my £50 beat up 1 Row could do with a few replacing.
Logged
Q: How do you cure MAD?
A: Buy more Boxes

chappie86

  • Folker
  • Good talker
  • **
  • Offline Offline
  • Posts: 65
  • Discovering Melodeons
Re: A Hohner to Refurb and Learn From
« Reply #6 on: April 22, 2012, 07:44:29 AM »

Thanks for the advice Christopher K. I certainley won't touch the reeds until I really know what I am doing, which may take me years yet! For reed tuning I will take the box to one of the specialists from this forum.  :||:

Out of interest does anybody know roughly how much a professional repairer charges to re-tune a box?

I am looking forward to having a go at cosmetically cleaning the box up and trying some of the easier tasks mentioned. The first thing that needs doing is removing the broken bass strap and fitting a new one? is this an easy task? are there any threads to help me on this?

Great boating story and I am glad everything was OK after a few Red Stripes!  (:)

Chappie
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A Hohner to Refurb and Learn From
« Reply #7 on: April 22, 2012, 08:02:06 AM »

Thanks for the advice Christopher K. I certainley won't touch the reeds until I really know what I am doing, which may take me years yet! For reed tuning I will take the box to one of the specialists from this forum.  :||:

Out of interest does anybody know roughly how much a professional repairer charges to re-tune a box?

I am looking forward to having a go at cosmetically cleaning the box up and trying some of the easier tasks mentioned. The first thing that needs doing is removing the broken bass strap and fitting a new one? is this an easy task? are there any threads to help me on this?

Great boating story and I am glad everything was OK after a few Red Stripes!  (:)

Chappie

Replacing the bass strap is dead easy just unscrew the old one and screw on a new one, the only slightly tricky bit is getting the length right but even that is not rocket surgery.

Replacement Strap

chappie86

  • Folker
  • Good talker
  • **
  • Offline Offline
  • Posts: 65
  • Discovering Melodeons
Re: A Hohner to Refurb and Learn From
« Reply #8 on: April 22, 2012, 08:07:19 AM »

Quote
Replacing the bass strap is dead easy just unscrew the old one and screw on a new one, the only slightly tricky bit is getting the length right but even that is not rocket surgery.

Thanks Lester, much appreciated!  (:)
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: A Hohner to Refurb and Learn From
« Reply #9 on: April 22, 2012, 09:10:37 AM »

I've got a C/F Hohner in exactly the same casework but in gloss black lacquer - it was my first attempt at repair/restoration and I'm very satisfied with the results; go slowly and methodically, and remember a complicated job is only a lot of simple jobs strung together. And DO get hold of some old reeds to practise tuning on; I picked up an old small PA from eBay for next to nothing, which provided me with the basis for a tuning bellows, a selection of odd small spare bits and some reeds to learn about tuning. Best of luck.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A Hohner to Refurb and Learn From
« Reply #10 on: April 22, 2012, 09:12:52 AM »

Quote
Replacing the bass strap is dead easy just unscrew the old one and screw on a new one, the only slightly tricky bit is getting the length right but even that is not rocket surgery.

Thanks Lester, much appreciated!  (:)

Of course you could go for an upgrade:

http://www.cgmmusical.co.uk/CGM_Musical_Services/Bass_Straps.html#14
http://www.cgmmusical.co.uk/CGM_Musical_Services/Hardware_Misc..html#8

You will also need longer bass end feet

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: A Hohner to Refurb and Learn From
« Reply #11 on: April 23, 2012, 01:19:32 AM »

Funny, a few weeks ago I acquired one of those "faux walnut" boxes for less than $100, and rebuilt it using parts of another box of the same era, and it's now my BC box! Easy to find new parts for them.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: A Hohner to Refurb and Learn From
« Reply #12 on: April 23, 2012, 05:29:30 AM »

Funny, a few weeks ago I acquired one of those "faux walnut" boxes for less than $100, and rebuilt it using parts of another box of the same era, and it's now my BC box! Easy to find new parts for them.

That looks pretty sweet! I like the stained (not black, painted) keyboard cover. Did you sand it down and stain it yourself or find it like that?

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: A Hohner to Refurb and Learn From
« Reply #13 on: April 23, 2012, 07:59:54 AM »

That Faux walnut looks far better than the mother of bogseat versions, could have been the forerunner to the boutique italian boxes of today if it had caught on .. if it takes the same parts as the pokerwork, there`s no shortage, every part of a pokerwork can be bought from Charlie Marshall - in fact you could make up a kit box from stock and have the finish, key or reeds of your choice ! . it`d cost probably 3X the price of an assembled one though ;-)
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: A Hohner to Refurb and Learn From
« Reply #14 on: April 23, 2012, 01:08:19 PM »

That looks pretty sweet! I like the stained (not black, painted) keyboard cover. Did you sand it down and stain it yourself or find it like that?
The keyboard came like that on another donor box, the previous owner sanded and re-finished it. I decided to leave it like that, it looks better than black paint.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

chappie86

  • Folker
  • Good talker
  • **
  • Offline Offline
  • Posts: 65
  • Discovering Melodeons
Re: A Hohner to Refurb and Learn From
« Reply #15 on: April 23, 2012, 06:00:22 PM »

That looks pretty sweet! I like the stained (not black, painted) keyboard cover. Did you sand it down and stain it yourself or find it like that?
The keyboard came like that on another donor box, the previous owner sanded and re-finished it. I decided to leave it like that, it looks better than black paint.


I really like the stained keyboard cover, I may keep this in mind for doing mine up. Mine was not quite as much of a bargain, but at just over £100 I am very happy and hopefully the work I have to undertake will teach me lots about this great instrument!
« Last Edit: April 23, 2012, 06:09:28 PM by chappie86 »
Logged

chappie86

  • Folker
  • Good talker
  • **
  • Offline Offline
  • Posts: 65
  • Discovering Melodeons
Re: A Hohner to Refurb and Learn From
« Reply #16 on: April 23, 2012, 08:28:20 PM »

I have found a video of Tony Hall playing a very similar looking box  :||:

http://youtu.be/b6BxXRyylhk
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: A Hohner to Refurb and Learn From
« Reply #17 on: April 24, 2012, 02:04:42 AM »

It's basically a Pokerwork with a different finish! There was also another finish available with painted flowers. Parts are 100% exchangeable, from what I found, and current 2815/2915 parts will also fit.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: A Hohner to Refurb and Learn From
« Reply #18 on: April 25, 2012, 06:51:14 AM »

current 2815/2915 parts will also fit.

With one two small caveats, yes they will; among the parts I replaced on mine were the grille and the cabinet corners. The modern grille fits perfectly, but the metal is lighter gauge and the fret is of a different pattern from the original, if that matters to you - I'm quite happy with the new one myself.  The cabinet corners are just a shade longer than the old ones; modern 2915 cabinets are apparently fractionally wider than the old ones, so you get a tiny overhang. It did bother me a little at first, but I couldn't see an easy and satisfactory way of shortening them without damaging the plating, so I decided to live with it.  I don't suppose anyone else notices, and I don't think about it myself now. All the other bits I replaced went straight in with no bother.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: A Hohner to Refurb and Learn From
« Reply #19 on: April 25, 2012, 08:22:08 AM »

  The cabinet corners are just a shade longer than the old ones; modern 2915 cabinets are apparently fractionally wider than the old ones, so you get a tiny overhang. It did bother me a little at first, but I couldn't see an easy and satisfactory way of shortening them without damaging the plating,

New cabinet corners are now made of stainless steel so no plating to worry about.    I push the new corners fully into place (they sometimes need gentle persuasion with a block of wood and a hammer) and then file off the overhang, being careful not to file away any wood.

There are also some differences in reed blocks,  at least three different methods have been used to hold the blocks in place, and the gasket material below the block may be on the block itself, or on the base board, so in swapping blocks you may need to add or remove gasket.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal