I've only had a melodeon for a month, and until today had never taken one apart. A friend gave me his "Made in Germany" Erica, yesterday, asking me to "take a look at it", just in case the bass issue can be fixed by a novice. He said it was perfect when he put in back in its box, some years ago, and left it there. The bass buttons were stuck in the down position and as a result we the box had no puff, so we couldn't work out if it was still in tune.
Taking off the side I see the 3 screws holding on the whole bass mechanism have fallen off, so the mechanism is unattached. The 3 screws were still inside the box. Also one spring has come off its lever on one of the arms. Photo attached.
I guess I just need to latch the spring back into place and screw the bass mechanism back in again. I imagine I need to get the mechanism out of the box to put the spring back into position. However it seems fiddly to get the mechanism out, despite a slight extra cutout in the box side, presumably to facilitate this manoeuvre. I don't dare force it. Is there a "trick" to doing this?
Secondly, is it common for the screws holding on the mechanism to get loose over time, causing it to fall off? I'm wondering whether to put a tiny bit of packing in the old screw-holes in case they've got a bit oversized. They look pretty clean, so I can't really understand why the whole thing would fall off.
Any advice welcome.
Once we can get some air control we'll be able to check the tuning (my friend says he'll then send it to a professional if it needs a re-tune).
Thanks.