Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bass mechanism fallen off  (Read 1725 times)

0 Members and 1 Guest are viewing this topic.

Roland OBrien

  • Member
  • *
  • Offline Offline
  • Posts: 45
Bass mechanism fallen off
« on: July 07, 2012, 10:46:57 AM »

I've only had a melodeon for a month, and until today had never taken one apart. A friend gave me his "Made in Germany" Erica, yesterday, asking me to "take a look at it", just in case the bass issue can be fixed by a novice. He said it was perfect when he put in back in its box, some years ago, and left it there. The bass buttons were stuck in the down position and as a result we the box had no puff, so we couldn't work out if it was still in tune.

Taking off the side I see the 3 screws holding on the whole bass mechanism have fallen off, so the mechanism is unattached. The 3 screws were still inside the box. Also one spring has come off its lever on one of the arms. Photo attached.

I guess I just need to latch the spring back into place and screw the bass mechanism back in again. I imagine I need to get the mechanism out of the box to put the spring back into position. However it seems fiddly to get the mechanism out, despite a slight extra cutout in the box side, presumably to facilitate this manoeuvre. I don't dare force it. Is there a "trick" to doing this? 

Secondly, is it common for the screws holding on the mechanism to get loose over time, causing it to fall off? I'm wondering whether to put a tiny bit of packing in the old screw-holes in case they've got a bit oversized. They look pretty clean, so I can't really understand why the whole thing would fall off.

Any advice welcome.

Once we can get some air control we'll be able to check the tuning (my friend says he'll then send it to a professional if it needs a re-tune).

Thanks.

Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bass mechanism fallen off
« Reply #1 on: July 07, 2012, 11:51:12 AM »

What I would do is glue and peg the holes, I use hardwood toothpicks. Then disconnect all the springs prior to refitting the mechanism, then reconnect the springs. This is fiddly but essential to ensure a successful fix

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass mechanism fallen off
« Reply #2 on: July 07, 2012, 12:08:04 PM »

Agree with Lester.   Springs must be hooked up only after the screws have been secured. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Roland OBrien

  • Member
  • *
  • Offline Offline
  • Posts: 45
Re: Bass mechanism fallen off
« Reply #3 on: July 07, 2012, 12:34:19 PM »

Thanks for the advice, gents. That sounds as if it's a perfect job for this rainy Saturday afternoon.
Logged

Roland OBrien

  • Member
  • *
  • Offline Offline
  • Posts: 45
Re: Bass mechanism fallen off
« Reply #4 on: July 07, 2012, 02:31:28 PM »

I followed that advice and have put the mechanism back on, and got some air  back into the instrument (which seems in tune). Hoorah! (:)

However the spring at the base of one of the pallet arms, which I thought had come unhooked, must have actually snapped at some point in the past (though I can't find any bits of it within the box)...so it needs replacing.  :-\

To do this do you have to slide out the bar which the pallet arms rotate from, and introduce a replacement spring next to the relevant pallet arm?

If the answer is "yes", I have a feeling I should tell my friend that this is a task for someone who knows how to do the job! The Erica is superficially in very good condition, the inside is really clean etc. It would be a shame to let me loose on it.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass mechanism fallen off
« Reply #5 on: July 07, 2012, 02:33:34 PM »

The answer is yes
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bass mechanism fallen off
« Reply #6 on: July 07, 2012, 02:40:39 PM »

I would have thought that as it seems to have a a bit of a hard time at some juncture it may be worth getting a pro to give it the once over. Replacing the spring can be a reasonably hard job dependant on which spring is broken (if it is an outer one you can probably do it without removing the mech, inner ones are normally easier if you do remove it).

Roland OBrien

  • Member
  • *
  • Offline Offline
  • Posts: 45
Re: Bass mechanism fallen off
« Reply #7 on: July 07, 2012, 03:55:21 PM »

Thanks again for the advice, chaps.  It is an inner spring. I'll suggest my friend gets it sorted out professionally.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal