Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: To wax or not to wax ... that is the question.  (Read 6410 times)

0 Members and 1 Guest are viewing this topic.

David J

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 186
Re: To wax or not to wax ... that is the question.
« Reply #20 on: June 23, 2015, 01:38:09 PM »

I'm half way through the restoration of a 1938-ish Hohner 48-bass PA and am intrigued to find that nails and wax have been used for both the largest and also the smallest bass reeds, but not on the equivalent pitch treble reeds. Any comments about this? I also made the mistake of trying to slide out one of the small reeds after loosening the wax without removing the nails and thus wrecked the inner reed tongue. Fortunately a suitably sized replacement was available from Hohner, but I won't be doing that again.

Totally agree with Squeezy though - it's very difficult to achieve a factory-grade neat finish whatever waxing method you use; avoiding dropping wax on reeds or valves is also very difficult, and if you have to remove a reed which has been newly waxed in somehow everything including your fingers gets glued together in seconds.

However, practice makes perfect a bit better  ;D
Logged
Luukinen Elene III, Baffetti Binci, and an increasing number of Hohners

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: To wax or not to wax ... that is the question.
« Reply #21 on: June 23, 2015, 01:45:30 PM »

I love waxing and I think that it is a very elegant solution to the problem. I don't know of any modern materials which would work as well.

It is also worth mentioning that wax can last for a very long time and although eventually it will need to be replaced, by that time it will be straightforward to remove. Most modern materials are nightmarish to remove when they eventually stop sealing well.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

ChrisLDD

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
  • ... but which way is up?
Re: To wax or not to wax ... that is the question.
« Reply #22 on: June 24, 2015, 12:34:33 AM »

HI,

In my Experimental/Prototype/Dream melodeon, I've opted for fixing the reeds in place using M2 screws.

The attached picture shows some single row aluminium reed-blocks that I milled up for test purposes.
Under each screw there is a small captive rubber O-ring that oozes out over the reed-plate when the screw is tightened  - I found that this mitigates the problem of reed-tongue deflection due to clamping stresses.



Logged
Trying to learn enough magic to make my own melodeon.

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: To wax or not to wax ... that is the question.
« Reply #23 on: June 24, 2015, 01:08:52 AM »

Following Nick lighting the blue touch paper  :o I've had a run through the 'old' style adhesives / fillers which the early makers might have used instead and ignoring the various 'boil it up' glues, dissolved shellac is the only other contender which springs to mind, although pitch / rubber based materials like Chattertons compound might work they are typically not very fluid and not wrangler friendly to remove.

Moving to modern materials, for screwed / pinned down plates there are numerous leather or felt substitutes such as self adhesive neoprene foam now used for bellows end seals, what the durability would be remains to be seen. In terms of adhesives, sealers or glues, most which spring to mind suffer from the removability problem, RTV silicon sealers are brilliant for application but unless the woodwork is sealed will loose grip somewhere along the line, something they will not do to order from the plates, (something if applied by a builders gun through 1/4" nozzle we may all have heard resultant screams on the wind originating in Tyneside, Whales, Andover and other locales)

However if used more carefully with the right applicator may well save the day when the continuing demise of the honeybee leads to wax being added to the CITES list with Ivory and Rhino horn and trades in dark places at £1000 an ounce  :o

Other engineering or woodworking adhesives or fillers available do not seem to fit the bill although some of the UV activated resins such as used in dentistry might find another niche.

None of the synthetic waxes appear to have long term stability, we know the general opinion of latex based adhesives, although the latest synthetic rubber base - Afghanistani dandelion sap - might yield a new generation.

So going back to John's original question it seems both methods have worked well for decades, if anyone was going to find a weakness in either through frequent and energetic playing it is likely to be you - taking 'real' waxing (by spoon as diatonix highlights, as a skill developed through greater practice) out of the equation, it seems logical to wax by stick and iron if  that is how the box has been done originally, or pin / screw if that was the original method until you develop a preference - I suspect there is more skill and fiddling involved in laying down new leather or felt strips and trying self adhesive neoprene foam might be an interesting experiment. The downside on an old instrument may be finding enough new sites for pins or screws if the old holes wear oversize.

NB having seen various waxing videos where people are using lumps of wax such as a cobbler or saddler might use, making thin sticks 1/8" square or thereabouts adds an extra degree of precision for those awkward places.

And not a mention of cylinder heads.........
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: To wax or not to wax ... that is the question.
« Reply #24 on: June 24, 2015, 01:11:19 AM »

That is a beautiful bit of work Chris
« Last Edit: June 24, 2015, 01:13:12 AM by Broadland Boy »
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal